Used for the conveyance of private rural property connected to a private supply
Wyo | EPA | Det. | ||
Analyte | MCL * | MCL/SMCL ** | Limit | Units |
Calcium Magnesium Sodium | 1 1 3 | mg/L mg/L mg/L | ||
Hardness as CaCO3 | mg/L | |||
Total Alkalinity as CaCO Chloride | 3 (250) | 250 | mg/L | |
Sulfates | 750 | deferred | 3 | mg/L |
Nitrates + Nitrites as N | 10 | 10 | 0.05 | mg/L |
Fluoride | (2) | 2 | mg/L | |
Conductivity pH | (6.5-8.5 ) | 6.5-8.5 | Umhos/cm pH Units | |
Total Dissolved Solids, Summation | 1500 | 500 | mg/L | |
Iron | (0.3) | 0.3 | mg/L | |
Manganese | (0.05) | 0.05 | mg/L | |
Lead, First draw | (0.015) | TT/0.015 | 0.002 | mg/L |
Copper, First draw | (1.3) | TT/1.3 | 0.1 | mg/L |
Lead, Second draw | (0.015) | TT/0.015 | 0.002 | mg/L |
Copper, Second draw | (1.3) | TT/1.3 | 0.1 | mg/L |
Zinc Corrosivity | (5) (Non-Cor) | 5 Non-Cor | mg/L LI Units | |
Total Coliform | Negative | Negative | /100ml |
1. Analytes in BOLD shaded ares represent the minimum requirement for private water supplies serving a single residence.
2. Analytes in parentheses are recommended, in addition to those in #1, for private water supplies connected to a single residence but required for private supplies serving multiple residences below those regulated under the Safe Drinking Water Act.
3. If first draw lead and/or copper data exceeds recommendations, the data should ONLY be used to warn buyers or renters and make suggestions to minimize exposure.
*MCL - Maximum Contaminant Level
**SMCL - Secondary Maximum Contaminant Level