(a) Wherever a Chapter is referenced, it means Wyoming Solid and Hazardous Waste Division Rules and Regulations, Chapter 1 Storage Tank Program, Storage Tanks, unless otherwise specified. Wherever a Part or Section is referenced, it means that Part or Section in this Chapter 1 unless otherwise specified.
(b) There are a number of places within this Chapter where codes and standards are referenced. There are also references to regulations issued by other agencies. The following apply to all such references in this Chapter: - (i) In all cases, the referenced codes, standards, and regulations are lengthy documents in and of themselves. Inserting the entire text of these documents into this Chapter would be unduly cumbersome and expensive.
- (ii) The references to these codes, standards, and regulations in this Chapter fully identify the material by title and date, and any later amendments or editions are specifically not incorporated into this Chapter.
- (iii) The department has obtained a complete copy of the code, standard, or regulation referenced in this Chapter and placed them in the Wyoming State Library. These materials can be checked out either directly from the State Library or through interlibrary loan from any Wyoming library, which is part of that system.
- (iv) Each code, standard, or regulation referenced in this Chapter is published independently and is available from the publisher. The name, address and contact information for all such publishers are contained in Section 5. Copies may be obtained from the publisher.
- (v) Copies of the codes, standards, or regulations referenced in this Chapter are also available at cost by contacting the Storage Tank Program,307-777-7752.
(c) The full reference for all codes and standards is provided in this Section. The abbreviated reference is provided throughout the Chapter. When an abbreviated reference is encountered, refer to this Section for the full reference. - (i) A4A Airport Fuel Facilities Operations and Maintenance Guidance Manual, 2004.
- (ii) American Petroleum Institute (API)
- (A) API Recommended Practice 1007, "Loading and Unloading of MC 306/DOT 406 Cargo Tank Motor Vehicles, 2001."
- (B) API Recommended Practice 1604, "Closure of Underground Petroleum Storage Tanks, Third Edition, March 1996; Reaffirmed December 2010."
- (C) API Recommended Practice 1615, "Installation of Underground Petroleum Storage Systems, Fifth Edition, March 1996; Reaffirmed November 2011."
- (D) API Recommended Practice 1626, "Storing and Handling Ethanol and Gasoline-Ethanol Blends at Distribution Terminals and Filling Stations, Second Edition, 2010."
- (E) API Recommended Practice 2016, "Guidelines and Procedures for Entering and Cleaning Petroleum Storage Tanks, First Edition, August 2001."
- (F) API Recommended Practice 2200, "Repairing Crude Oil, Liquefied Petroleum Gas, and Product Pipelines, Fifth Edition, 2015."
- (G) API Specification 12D, "Specification for Field Welded Tanks for Storage of Production Liquids, Eleventh Edition, 2008."
- (H) API Standard 620, "Design and Construction of Large, Welded Low-Pressure Storage Tanks, Twelfth Edition, 2013."
- (I) API Standard 650, "Welded Steel Tank for Oil Storage, Twelfth Edition, 2013."
- (J) API Standard 651, "Cathodic Protection of Aboveground Storage Tanks, Fourth Edition, 2014."
- (K) API Standard 653, "Tank Inspection, Repair, Alteration, and Reconstruction, Fifth Edition, 2014."
- (L) API Standard 1631, "Interior Lining and Periodic Inspection of Underground Storage Tanks, Fifth Edition, 2001."
- (M) API Standard 2000, "Venting Atmospheric and Low-Pressure Storage Tanks, Seventh Edition, 2014."
- (N) API Standard 2015, "Safe Entry and Cleaning of Petroleum Storage Tanks, Planning and Managing Tank Entry From Decommissioning Through Recommissioning, Seventh Edition, 2014."
- (iii) American Society for Testing and Materials (ASTM)
- (A) ASTM D6751, "Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels, 2015."
- (B) ASTM G158, "Standard Guide for Three Methods of Assessing Buried Steel Tanks, 2016."
- (iv) Code of Federal Regulations (CFR)
- (A) 10 CFR Part 50, as published on January 1, 2016.
- (B) 29 CFR Part 1910, as published on July 1, 2016.
- (C) 40 CFR Part 112, as published on July 1, 2016.
- (D) 40 CFR Part 136, as published on July 1, 2016.
- (E) 40 CFR Part 141, as published on July 1, 2016.
- (F) 40 CFR Part 261, as published on July 1, 2016.
- (G) 40 CFR Part 280, as published on July 1, 2016. (H) 40 CFR Part 302, as published on July 1, 2016.
- (v) Fiberglass Tank and Pipe Institute
- (A) Recommended Practice T-95-02, "Remanufacturing of Fiberglass Reinforced Plastic (FRP) Underground Storage Tanks, 1995."
- (B) Recommended Practice 2007-2, "Field Test Protocol for Testing the Annular Space of Installed Underground Fiberglass Double and Triple-Wall Tanks with Dry Annular Space, 2007."
- (vi) International Fire Code (IFC), 5704.2.7.3, 5704.2.3.1, 5704.2.3.2, and 5703.5, 2015.
- (vii) National Association of Corrosion Engineers (NACE)
- (A) NACE International Standard Practice SP0169-2013, "Control of External Corrosion on Underground or Submerged Metallic Piping Systems, 2013."
- (B) NACE International Standard Practice SP0285-2011, "External Corrosion Control of Underground Storage Tank Systems by Cathodic Protection, 2011."
- (C) NACE Standard SP0193-2016, "External Cathodic Protection of On-Grade Carbon Steel Storage Tank Bottoms, 2016."
- (D) NACE International Test Method TM0101-2012, "Measurement Techniques Related to Criteria for Cathodic Protection of Underground Storage Tank Systems, 2012."
- (E) NACE International Test Method TM0497-2012, "Measurement Techniques Related to Criteria for Cathodic Protection on Underground or Submerged Metallic Piping Systems, 2012."
- (viii) National Fire Protection Association (NFPA)
- (A) NFPA Standard 30, "Flammable and Combustible Liquids Code, 2015 Edition."
- (B) NFPA Standard 30A, "Code for Motor Fuel Dispensing Facilities and Repair Garages, 2015 Edition."
- (C) NFPA Standard 326, "Standard for the Safeguarding of Tanks and Containers for Entry, Cleaning, or Repair, 2015 Edition."
- (D) NFPA Standard 385, "Standard for Tank Vehicles for Flammable and Combustible Liquids, 2017 Edition."
- (ix) National Leak Prevention Association
- (A) Standard 631, Chapter A, "Entry, Cleaning, Interior Inspection, Repair, and Lining of Underground Storage Tanks, 2009."
- (B) Standard 631, Chapter C, "Internal Inspection of Steel Tanks for Retrofit of Cathodic Protection, 2009."
- (x) Petroleum Equipment Institute (PEI)
- (A) PEI RP100, "Recommended Practices for Installation of Underground Liquid Storage Systems, 2011."
- (B) PEI RP200, "Recommended Practices for Installation of Aboveground Storage Systems for Motor Vehicle Fueling, 2013."
- (C) PEI RP900, "Recommended Practices for the Inspection and Maintenance of UST Systems, 2008."
- (D) PEI RP1200, "Recommended Practices for the Testing and Verification of Spill, Overfill, Leak Detection and Secondary Containment Equipment at UST Facilities, 2017."
- (xi) Steel Tank Institute (STI)
- (A) Association for Composite Tanks ACT-100-U®, Specification F894, "Specification for External Corrosion Protection of FRP Composite Steel Underground Storage Tanks, 2015."
- (B) Association for Composite Tanks ACT-100-U®, Specification F961, "Specification for External Corrosion Protection of Composite Steel Underground Storage Tanks, 2015."
- (C) STI Recommended Practice R012, "Recommended Practice for Interstitial Tightness Testing of Existing Underground Double Wall Steel Tanks, 2007."
- (D) STI Recommended Practice R051, Cathodic Protection Testing Procedures for STI-P3® USTs, 2006."
- (E) STI Recommended Practice R892, "Recommended Practice for Corrosion Protection of Underground Piping Networks Associated with Liquid Storage and Dispensing Systems, 2006."
- (F) STI Recommended Practice R972, "Recommended Practice for the Addition of Supplemental Anodes to STI-P3® Tanks, 2010."
- (G) STI-P3® Specification and Manual for External Corrosion Protection of Underground Steel Storage Tanks, 2015.
- (H) STI Specification F922, "Steel Tank Institute Specification for Permatank®, 2014."
- (I) STI Standard F841, "Standard for Dual Wall Underground Steel Storage Tanks, 2006."
- (xii) Underwriters Laboratories, Inc. (UL)
- (A) UL Standard 58, "Standard for Safety for Steel Underground Tanks for Flammable and Combustible Liquids, Ninth Edition, 1996."
- (B) UL Standard 142, "Steel Aboveground Tanks for Flammable and Combustible Liquids, Ninth Edition, 2006."
- (C) UL Standard 567, "Standard for Emergency Breakaway Fittings, Swivel Connectors and Pipe-Connection Fittings for Petroleum Products and LP-Gas, Tenth Edition, 2014."
- (D) UL Standard 971, "Standard for Nonmetallic Underground Piping for Flammable Liquids, First Edition, 1995."
- (E) UL Standard 1316, "Glass-Fiber-Reinforced Plastic Underground Storage Tanks for Petroleum Products, Alcohols, and Alcohol-Gasoline Mixtures, Second Edition, 1994."
- (F) UL Standard 1746, "Standard for External Corrosion Protection Systems for Steel Underground Storage Tanks, Third Edition, 2007."
- (G) UL Standard 2085, "Protected Aboveground Tanks for Flammable and Combustible Liquids, Second Edition, 1997."
- (H) UL Subject 971A, "Outline of Investigation for Metallic Underground Fuel Pipe, First Edition, 2006."
- (xiii) Underwriters Laboratories of Canada (UL of Canada)
- (A) UL of Canada S603, "Standard for Steel Underground Tanks for Flammable and Combustible Liquids, 2014."
- (B) UL of Canada S603.1, "Standard for External Corrosion Protection Systems for Steel Underground Tanks for Flammable and Combustible Liquids, 2014."
- (C) UL of Canada S615, "Standard for Reinforced Plastic Underground Tanks for Flammable and Combustible Liquids, 2014."
- (D) UL of Canada S631, "Standard for Isolating Bushings for Steel Underground Tanks Protected with External Corrosion Protection Systems, 2005."
- (E) UL of Canada S660, "Standard for Nonmetallic Underground Piping for Flammable and Combustible Liquids, 2008."
- (xiv) U.S. Department of Defense
- (A) Directive 4140.25, "DoD Management Policy for Energy Commodities and Related Services, 2015."
- (B) Unified Facilities Criteria (UFC) 3-460-01, "Petroleum Fuel Facilities, 2010."
- (xv) U.S. Department of Health, Education, and Welfare, Criteria for a Recommended Standard, Working in Confined Spaces, December 1979.