(a) After the effective date of these regulations, Class V facilities may be abandoned in place if the following conditions are met and if it can be demonstrated to the satisfaction of the administrator that:
(b) Facilities which cannot demonstrate compliance with subsection (a) (i) or (a) (ii) of this section, may be abandoned in place if:
(c) Facilities which cannot make the demonstrations required under either subsection (a) or (b) of this section shall be excavated to the point where contamination is no longer visible in the soil. At that point, samples shall be taken of the soil for all hazardous constituents which may have been discharged through the system. Materials excavated shall be removed from the site for disposal under approval of the Solid and Hazardous Waste Management Division.
(d) Cathodic protection (5F1) facilities will be considered to have made the demonstrations required under subsections (a) and (b) if no waste has been disposed of into the facility. After they have fulfilled their useful purpose, they shall be abandoned by filling all breather pipes with an impervious material and removing all surface installations down to a depth of three (3) feet. All anodes where the construction included a surface casing shall also have the surface casing cut off three (3) feet below grade and a plug or cap shall be installed on the surface casing. It is not necessary to remove the coke breeze, anodes, and seals during abandonment. The administrator may approve other alternatives for abandonment if they provide adequate environmental protection.
(e) Prior to abandoning any class 5C4 automotive waste disposal facility, the operator shall provide 30 days notice to the administrator.
020-16 Wyo. Code R. § 16-12