Section 8-3 - Nonfriable Asbestos-Containing Solid Waste Management Standards (a) Applicability: The standards in this section apply to all solid waste management facilities which accept nonfriable asbestos-containing solid wastes.
(b) Reserved;
(c) Reserved;
(d) Operating standards: All facilities used for the disposal of nonfriable asbestos-containing solid wastes shall be operated in accordance with the following standards, as well as any other applicable facility operating standards: - (i) Nonfriable asbestos wastes shall be covered with a minimum of six (6) inches of acceptable cover material prior to compaction. The wastes shall be covered:
- (A) Immediately upon receipt, if the wastes are disposed in a solid waste management unit which is not subject to the access restrictions described in Section 4 of this chapter.
- (B) Within twelve (12) hours of receipt, if the wastes are disposed in a solid waste managementunit which is subject to the access restrictions described in Section 4 of this chapter.
- (ii) Nonfriable asbestos wastes shall be disposed in a manner which minimizes any increase in friability of the wastes, particularly the friability of any exposed edges.
(e) Reserved;
(f) Reserved;