Statutes, codes, and regulations
Wyoming Administrative Code
Agency 012 - Architects and Landscape Architects, Board ofSubagency 0001 - Architects and Landscape Architects, Board of
Chapter 9 - Seal Specifications and Use
Section 9-1 - Design of the Seal

012-9 Wyo. Code R. § 9-1

Download
PDF
Current through April 27, 2019
Section 9-1 - Design of the Seal

(a) Each licensed architect and landscape architect's seal shall be no less than 1½"and no more than 2" in diameter. It shall contain the name of the licensed architect or landscape architect; his or her license number, the word "Date:", and the words "LICENSED ARCHITECT-STATE OF WYOMING" or "LICENSED LANDSCAPE ARCHITECT-STATE OF WYOMING" as appropriate. This seal shall approximate the format shown below:

Image Not Available

  • (i) The seal design adopted by the Board in the Rules and Regulations dated April 27, 2001, as it appears below, will be accepted for persons licensed prior to the effective date of these rules.

    Image Not Available

  • (ii) The seal design adopted by the Board in the Rules and Regulations dated June 18, 1992, as it appears below, will be accepted for persons licensed prior to April 27, 2001.

    Image Not Available

(b) The format of the seal may be a rubber stamp, an embosser, or a digital image.

(c) Each licensee is responsible for procuring their own seal.

012-9 Wyo. Code R. § 9-1

Amended, Eff. 1/8/2015.

Amended, Eff. 10/25/2018.