010-6 Wyo. Code R. § 6-24

Current through April 27, 2019

Section 6-24 - Vending Machine Doors and Openings

(a) Vending machine doors and access opening covers to food and container storage spaces shall be tight-fitting so that the space along the entire interface between the doors or covers and the cabinet of the machine, if the doors or covers are in a closed position, is no greater than one-sixteenth (1/16) inch (1.5 millimeters) or by:

• (i) Being covered with louvers, screens, or materials that provide an equivalent opening of not greater than one-sixteenth (1/16) inch or (1.5 millimeters). Screening of twelve (12) or more mesh to 2.5 centimeters (12 mesh to 1 inch) meets this requirement;

• (ii) Being effectively gasketed;

• (iii) Having interface surfaces that are at least one-half (2) inch (13 millimeters) wide; or

• (iv) Jambs or surfaces used to form an L-shaped entry path to the interface.

(b) Vending machine service connection openings through an exterior wall of a machine shall be closed by sealants, clamps, or grommets so that the openings are no larger than one-sixteenth (1/16) inch or (1.5 millimeters).

010-6 Wyo. Code R. § 6-24