Wis. Admin. Code Department of Natural Resources NR 273.014
Any new source subject to this subchapter shall achieve the following standards:
Table 1-27
Lead-Tin-Bismuth
Rolling Spent Emulsions
NSPS | ||
Maximum for any 1 day | Maximum for monthly average | |
Pollutant or pollutant property | mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth rolled with emulsions | |
Antimony | 0.067 | 0.030 |
Lead | 0.010 | 0.005 |
Oil and grease | 0.468 | 0.281 |
Total suspended solids | 0.960 | 0.457 |
pH | (1) | (1) |
(1) Within the range of 7.5 to 10.0 at all times
Table 1-28
Lead-Tin-Bismuth
Rolling Spent Soap Solutions
NSPS | ||
Maximum for any 1 day | Maximum for monthly average | |
Pollutant or pollutant property | mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth rolled with soap solutions | |
Antimony | 0.120 | 0.055 |
Lead | 0.018 | 0.009 |
Oil and grease | 0.860 | 0.520 |
Total suspended solids | 1.8 | 0.840 |
pH | (1) | (1) |
(1) Within the range of 7.5 to 10.0 at all times
Table 1-29
Lead-Tin-Bismuth
Drawing Spent Emulsions
NSPS | ||
Maximum for any 1 day | Maximum for monthly average | |
Pollutant or pollutant property | mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth drawn with emulsions | |
Antimony | 0.076 | 0.034 |
Lead | 0.011 | 0.005 |
Oil and grease | 0.526 | 0.316 |
Total suspended solids | 1.087 | 0.513 |
pH | (1) | (1) |
(1) Within the range of 7.5 to 10.0 at all times
Table 1-30
Lead-Tin-Bismuth
Drawing Spent Soap Solutions
NSPS | ||
Maximum for any 1 day | Maximum for monthly average | |
Pollutant or pollutant property | mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth drawn with soap solutions | |
Antimony | 0.022 | 0.010 |
Lead | 0.003 | 0.002 |
Oil and grease | 0.149 | 0.090 |
Total suspended solids | 0.306 | 0.146 |
pH | (1) | (1) |
(1) Within the range of 7.5 to 10.0 at all times
Table 1-31
Lead-Tin-Bismuth
Extrusion Press and Solution Heat Treatment
Contact Cooling Water
NSPS | ||
Maximum for any 1 day | Maximum for monthly average | |
Pollutant or pollutant property | mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth heat treated | |
Antimony | 0.414 | 0.185 |
Lead | 0.061 | 0.030 |
Oil and grease | 2.8 | 1.72 |
Total suspended solids | 5.91 | 2.81 |
pH | (1) | (1) |
(1) Within the range of 7.5 to 10.0 at all times
Table 1-32
Lead-Tin-Bismuth
Extrusion Press Hydraulic Fuel Leakage
NSPS | ||
Maximum for any 1 day | Maximum for monthly average | |
Pollutant or pollutant property | mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth extruded | |
Antimony | 0.158 | 0.071 |
Lead | 0.023 | 0.011 |
Oil and grease | 1.10 | 0.660 |
Total suspended solids | 2.26 | 1.07 |
pH | (1) | (1) |
(1) Within the range of 7.5 to 10.0 at all times
Table 1-33
Lead-Tin-Bismuth
Continuous Strip Casting Contact Cooling Water
NSPS | ||
Maximum for any 1 day | Maximum for monthly average | |
Pollutant or pollutant property | mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth cast by the continuous strip method | |
Antimony | 0.003 | 0.001 |
Lead | 0.0004 | 0.0002 |
Oil and grease | 0.020 | 0.012 |
Total suspended solids | 0.041 | 0.020 |
pH | (1) | (1) |
(1) Within the range of 7.5 to 10.0 at all times
Table 1-34
Lead-Tin-Bismuth
Semi-Continuous Ingot Casting
Contact Cooling Water
NSPS | ||
Maximum for any 1 day | Maximum for monthly average | |
Pollutant or pollutant property | mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth ingot cast by the semi-continuous method | |
Antimony | 0.009 | 0.004 |
Lead | 0.001 | 0.0006 |
Oil and grease | 0.059 | 0.036 |
Total suspended solids | 0.121 | 0.058 |
pH | (1) | (1) |
(1) Within the range of 7.5 to 10.0 at all times
Table 1-35
Lead-Tin-Bismuth
Shot Casting Contact Cooling Water
NSPS | ||
Maximum for any 1 day | Maximum for monthly average | |
Pollutant or pollutant property | mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth shot cast | |
Antimony | 0.107 | 0.048 |
Lead | 0.016 | 0.008 |
Oil and grease | 0.746 | 0.448 |
Total suspended solids | 1.53 | 0.728 |
pH | (1) | (1) |
(1) Within the range of 7.5 to 10.0 at all times
Table 1-36
Lead-Tin-Bismuth
Shot-Forming Wet Air Pollution Control
Scrubber Blowdown
NSPS | ||
Maximum for any 1 day | Maximum for monthly average | |
Pollutant or pollutant property | mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth shot formed | |
Antimony | 0.169 | 0.076 |
Lead | 0.025 | 0.012 |
Oil and grease | 1.18 | 0.706 |
Total suspended solids | 2.41 | 1.15 |
pH | (1) | (1) |
(1) Within the range of 7.5 to 10.0 at all times
Table 1-37
Lead-Tin-Bismuth
Alkaline Cleaning Spent Baths
NSPS | ||
Maximum for any 1 day | Maximum for monthly average | |
Pollutant or pollutant property | mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth alkaline cleaned | |
Antimony | 0.345 | 0.154 |
Lead | 0.051 | 0.024 |
Oil and grease | 2.40 | 1.44 |
Total suspended solids | 4.92 | 2.34 |
pH | (1) | (1) |
(1) Within the range of 7.5 to 10.0 at all times
Table 1-38
Lead-Tin-Bismuth
Alkaline Cleaning Rinse
NSPS | ||
Maximum for any 1 day | Maximum for monthly average | |
Pollutant or pollutant property | mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth alkaline cleaned | |
Antimony | 0.678 | 0.302 |
Lead | 0.099 | 0.047 |
Oil and grease | 4.72 | 2.84 |
Total suspended solids | 9.68 | 4.60 |
pH | (1) | (1) |
(1) Within the range of 7.5 to 10.0 at all times
Table 1-39
Lead-Tin-Bismuth
Swaging Spent Emulsions
NSPS | ||
Maximum for any 1 day | Maximum for monthly average | |
Pollutant or pollutant property | mg/off-kg (pounds per million off-pounds) of lead-tin-bismuth swaged with emulsion | |
Antimony | 0.005 | 0.002 |
Lead | 0.0008 | 0.0004 |
Oil and grease | 0.036 | 0.022 |
Total suspended solids | 0.073 | 0.035 |
pH | (1) | (1) |
(1) Within the range of 7.5 to 10.0 at all times
Wis. Admin. Code Department of Natural Resources NR 273.014