Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by application of BCT:
Table 209
Strip, Sheet, and Miscellaneous Products Galvanizing, Terne Coating, and Other Coatings
BCT Effluent Limitations | ||
Maximum for any 1 day | Average of daily values for 30 consecutive days | |
Pollutant or pollutant property | kg/kkg (pounds per 1,000 pounds) of product | |
TSS | 0.175 | 0.0751 |
O&G | 0.0751 | 0.0250 |
pH | (1) | (1) |
(1) Within the range of 6.0 to 9.0
Table 210
Wire Products and Fasteners Galvanizing and Other Coatings
BCT Effluent Limitations | ||
Maximum for any 1 day | Average of daily values for 30 consecutive days | |
Pollutant or pollutant property | kg/kkg (pounds per 1,000 pounds) of product | |
TSS | 0.701 | 0.300 |
O&G | 0.300 | 0.100 |
pH | (1) | (1) |
(1) Within the range of 6.0 to 9.0
Table 211
Fume Scrubbers
BCT Effluent Limitations | ||
Maximum for any 1 day | Average of daily values for 30 consecutive days | |
Pollutant or pollutant property | kg per day for each fume scrubber | |
TSS | 38.1 | 16.3 |
O&G | 16.3 | 5.45 |
pH | (1) | (1) |
(1) Within the range of 6.0 to 9.0
State Code | Corresponding Federal Regulation |
s. NR 205.03 | 40 CFR 401.11 |
s. NR 205.04 | 40 CFR 401.11 |
ch. NR 211 | 40 CFR Part 403 |
s. NR 211.03 | 40 CFR 403.3 |
s. NR 211.13 | 40 CFR 403.7 |
s. NR 211.14 | 40 CFR 403.13 |
s. NR 211.15 | 40 CFR 403.12 |
ch. NR 219 | 40 CFR Part 136 |
ch. NR 254 | 40 CFR Part 420 |
Wis. Admin. Code Department of Natural Resources NR 254.127
The Wisconsin administrative code corresponds to the code of federal regulations as cross referenced in the following table: