Section NR 347.06 - Sampling and analysisUpon completion of the initial evaluation, the department shall establish sampling and analysis requirements.
(1) EXCEPTION. Except as provided in subs. (3) (a) and (6), the applicant shall collect and analyze data on sediments to be dredged in the manner outlined in this section.(2) CORRECT METHODS. Unless otherwise specified, sampling, sample handling and sample analysis to demonstrate compliance with this section shall be in accordance with methods from applicable sources enumerated in ch. NR 149.(3) NUMBER OF SAMPLES. (a) Sediment sampling may be waived by the department if it determines from its review of available information under s. NR 347.05(2) that sediment contamination is unlikely.(b) If available information is either insufficient to determine the possibility for sediment contamination, or shows a possibility for sediment contamination, the department shall require the applicant to collect sufficient samples to describe the chemical, physical and biological properties of the sediment. The exact number and location of sediment samples required and analyses to be conducted shall be specified by the department, in consultation with the applicant, based on the initial evaluation and on other factors including, but not limited to, the potential for possibility of contamination, volume and aerial extent of material to be dredged, depth of cut and proposed method of disposal.(c) For a project involving the disposal of dredged material at an upland disposal site, the department may require samples to be taken from the proposed disposal site and analyzed for parameters found to be elevated in the dredged material sediment samples. The number and location of disposal site samples required shall be specified by the department based on the size and other characteristics of the site.(d) For a project to be conducted in the Great Lakes with beach nourishment disposal, at least one sample every 250 linear feet of beach with a minimum of 2 samples shall be taken from the proposed beach nourishment disposal site and analyzed for particle size and color. Core or grab samplers may be used.(4) METHOD OF TAKING SAMPLES. (a) All samples shall be taken with a core sampler except as provided in sub. (3) (d). The department may approve other sampling methods if it finds them to be appropriate.(b) All sampling equipment shall be properly cleaned prior to and following each sample collection.(c) Samples collected for PCB, pesticide and other organic analyses shall be collected and processed using metallic (stainless steel preferred) liners, tubs, spoons and spatulas. Samples collected for other chemical analysis, including heavy metals, shall be collected and processed using non-metallic liners, tubs, spoons and spatulas.(d) Core samples from the dredging site shall be taken to the proposed dredging depth plus 2 feet.(e) Core samples shall be visually inspected for the existence of strata formation, and a written description including position, length, odor, texture and color of the strata shall be provided to the department.(5) SAMPLE HANDLING AFTER COLLECTION AND PRIOR TO ANALYSIS. Sample handling and storage prior to analysis shall be in accordance with the maximum holding times and container types given in table F of ch. NR 219. Samples shall be preserved at the time of collection by cooling to 4°C.(6) ANALYSES TO BE PERFORMED ON SEDIMENT SAMPLES. Analyses shall be done in accordance with methods from applicable sources enumerated in ch. NR 149. Analyses submitted to the department under this chapter shall be done by a laboratory certified or registered under ch. NR 149.(a) Samples shall be analyzed from each distinct layer observed in the material to be dredged. If no strata formation exists, core samples shall be divided into 2-foot segments, and each segment shall be analyzed for the required chemicals and characteristics. For cores extending into parent material, analysis of only the top 2-foot segment of parent material is required. The department may approve other subsampling methods if it finds them to be appropriate.(b) All samples shall be analyzed for those parameters listed in table 1 unless waived by the department as provided in par. (d). Elutriate testing may be required for all chemicals listed in Table 1 unless waived by the department as provided in par. (d).(c) If previous sampling data or other adequate available information indicates the possibility of contamination by chemicals not listed in table 1, the department may require analysis for those chemicals.(d) If previous sampling data or other adequate available information demonstrates that the possibility of contamination is negligible, analysis for any chemical may be waived, in writing, by the department.(e) The department may require additional samples and analyses as specified by law or for other appropriate reasons. GREAT LAKES | INLAND WATERS |
PCB (Total) | X | X |
Total 2,3,7,8 TCDD | X | X |
Total 2,3,7,8 TCDF | X | X |
GREAT LAKES | INLAND WATERS |
Aldrin | X | X |
Dieldrin | X | X |
Chlordane | X | X |
Endrin | X | X |
Heptachlor | X | X |
Lindane | X | X |
Toxaphene | X | X |
DDT | X | X |
DDE | X | X |
Arsenic | X | X |
Barium | X | X |
Cadmium | X | X |
Chromium | X |
Copper | X | X |
Cyanide | X |
Iron | X |
Lead | X | X |
Manganese | X |
Mercury | X | X |
Nickel | X | X |
Selenium | X | X |
Zinc | X | X |
Oil and Grease | X | X |
NO2, NO3, NH3 -N, TKN | X | X |
Total P | X | X |
Grain-size | X | X |
Percent Solids | X | X |
Total Organic Carbon | X | X |
Moisture Content | X | X |
Settleability | X | X |
(if return water) |
Wis. Admin. Code Department of Natural Resources NR 347.06
Cr. Register, February, 1989, No. 398, eff. 3-1-89; am. (5) and (6) (intro.), Register, November, 1992, No. 443, eff. 12-1-92.