Section NR 157.06 - Service facility responsibilities(1) Existing facilities for repair or salvaging of PCBs or products containing PCBs in amounts greater than 2 pounds per unit shall register with the department by January 1, 1978. Any such facility which has failed to register by the required date may not accept for repair or salvaging PCBs or products containing PCBs until such registration has been accomplished.(2) Any facility governed by this subsection shall institute procedures for the safe handling, storage, draining and packaging of PCBs or products containing PCBs for disposal. Except for transformers, containers used for transportation or storage of PCBs or products containing PCBs shall not be used for the storage or transportation of any other material.(3)(a) The service facility shall make provisions with a disposal facility to accept PCBs or products containing PCBs before permitting shipment for disposal. Shipment to a disposal facility in the state of Wisconsin shall be limited to those facilities which meet the requirements of s. NR 157.07. If, for any reason, delivery of the shipment is rejected by the disposal facility, the service facility shall make provisions for immediate return of the shipment or delivery to another disposal facility.(b) The service facility shall make provisions with approved transporters and disposal facilities to complete waste tracking forms provided or approved by the department. A copy of the form shall be retained by the service facility operator for the inspection of the department, and a copy shall be delivered with the PCBs or products containing PCBs to the disposal facility.(4) In lieu of the requirements of sub. (3), the service facility operator may contract with a full service contractor for transport of PCBs or products containing PCBs to the disposal facility.Wis. Admin. Code Department of Natural Resources NR 157.06
Cr. Register, August, 1977, No. 260, eff. 9-1-77; am. (3) (a), Register, May, 1995, No. 473, eff. 6-1-95.