Section NR 157.04 - Transporter responsibilities(1) No person shall transport PCBs or products containing PCBs for disposal unless licensed pursuant to ch. NR 663 as a transporter of hazardous wastes. This requirement shall not apply to the transportation of PCBs or products containing PCBs by the generator.(2) The transporter of PCBs or products containing PCBs shall complete the applicable portions of the waste tracking forms and deliver the remaining copies to the operator of the service or disposal facility.(3) The transporter of PCBs or products containing PCBs for disposal shall take measures to insure that: (a) All PCBs which are transported are stored in sturdy and secure containers in a manner to prevent leakage or spillage. Except for transformers, containers used for the transportation or storage of PCBs or products containing PCBs shall not be used for the storage or transportation of any other material.(b) A supply of absorbents or other materials or equipment is carried to be used to contain and clean up the PCBs should spillage occur.(c) Provisions are adopted for the repackaging of the PCBs and continuation of the shipment to the service or disposal facility and for noting the amount spilled and disposition of spilled waste on the waste tracking forms on resumption of the trip.(4) If spillage does occur, the transporter shall implement the procedures required in sub. (3) and shall promptly notify the division of emergency government at (608) 266-3232.Wis. Admin. Code Department of Natural Resources NR 157.04
Cr. Register, August, 1977, No. 260, eff. 9-1-77; am. (1), Register, July, 1981, No. 307, eff. 8-1-81; am. (1), Register, January, 1991, No. 421, eff. 2-1-91; correction in (1) made under s. 13.93(2m) (b) 7, Stats., Register December 2010 No. 660.