The American Society for Testing and Materials (ASTM) standards listed in the first column of Table 5 are incorporated by reference for the corresponding sections of chs. NR 400 to 439 and 445 to 499 in the third column of Table 5. Some standards are incorporated into other documents which are separately incorporated by reference in this chapter. Those documents are also listed in the third column of Table 5.
Wis. Admin. Code Department of Natural Resources NR 484.10
These materials are available for inspection in the offices of the department of natural resources and legislative reference bureau, Madison, Wisconsin or may be purchased for personal use at one of the following addresses:
American Society for Testing and Materials (ASTM)
100 Barr Harbor Drive
W Conshohocken PA 19428-2959
Telephone: (610) 832-9585
Fax: (610) 832-9555
E-mail: service@astm.org
Website http://www.astm.org
or from:
IHS Global Engineering Documents
15 Inverness Way East
Englewood, CO 80112
Telephone: (800) 854-7179
E-mail: globalcustomerservice@ihs.com
Website: http://www.astm.org
Table 5
ASTM Standard References
Standard Number | Standard Title | Incorporated by Reference For | |
(1) | ASTM C136-01 | Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates | NR 415.02(9) |
(2) | ASTM D97-02 | Standard Test Methods for Pour Point of Petroleum Products | NR 420.02(41) |
(3) | ASTM D129-00 (2005) | Standard Test Method for Sulfur in Petroleum Products (General Bomb Method) | 40 CFR part 60 Appendix A, Method 19 40 CFR part 75 Appendices A and D NR 439.08(2) (b) |
(4) | ASTM D240-02 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter | 40 CFR part 60 Appendix A, Method 19 40 CFR part 75 Appendices A, D, E, and F NR 400.02(79) NR 439.08(2) (c) |
(5) | ASTM D287-92 (2000) | Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method) | 40 CFR part 75 Appendix D |
(6) | ASTM D323-08 | Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method) | NR 419.045(5) (d) NR 420.02(31) |
(7) | ASTM D388-99e1 (2004) | Standard Classification of Coals by Rank | 40 CFR part 75 Appendix F NR 400.02(40) NR 462.02(6) |
(8) | ASTM D396-02a | Standard Specification for Fuel Oils | NR 400.02(70) NR 400.02(135) NR 420.03(1) (a) NR 462.02(11) and (41) |
(9) | ASTM D523-89 (1999) | Standard Test Method for Specular Gloss | ANSI A135.5-2004 NR 422.02(49m) |
(10) | ASTM D737-96 | Standard Test Method for Air Permeability of Textile Fabrics | NR 447.15(1) (a) 1. |
(12) | ASTM D968-93 (2001) | Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive | ANSI A135.5-2004 |
(13) | ASTM D975-02 | Standard Specification for Diesel Fuel Oils | NR 409.02(34) NR 420.03(1) (a) |
(14) | ASTM D1037-99 | Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials | ANSI A135.4-2004 ANSI A135.5-2004 |
(15) | ASTM D1072-90 (1999) | Standard Test Method for Total Sulfur in Fuel Gases | 40 CFR part 75 Appendix D |
(16) | ASTM D1193-99 | Standard Specification for Reagent Water | 40 CFR part 60 Appendix A: Method 5, par. 7.1.3 Method 5E, par. 7.2.1 Method 5F, par. 7.2.1 Method 6, par. 7.1.1 Method 7, par. 7.1.1 Method 7C, par. 7.1.1 Method 7D, par. 7.1.1 Method 10A, par. 7.1.1 Method 11, par. 7.1.3 Method 12, par. 7.1.3 Method 13A, par. 7.1.2 Method 14A, par. 7.1 Method 25D, par. 7.2.2.4 Method 26, par. 7.1.2 Method 26A, par. 7.1.2 Method 29, pars. 7.2.2, 7.4.2 and 7.5.6 40 CFR part 61 Appendix B, Method 101, par. 6.1.1 |
(17) | ASTM D1217-93 (1998) | Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer | 40 CFR part 75 Appendix D |
(18) | ASTM D1250-80 (1997) | Standard Guide for Petroleum Measurement Tables | 40 CFR part 75 Appendix D |
(20) | ASTM D1298-99 | Standard Practice for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method | 40 CFR part 75 Appendix D |
(21) | ASTM D1308-02 | Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes | ANSI A135.5-2004 |
(22) | ASTM D1475-98 (2003) | Standard Test Method for Density of Liquid Coatings, Inks, and Related Products | 40 CFR part 60 Appendix A: Method 24, par. 6.1 Method 24A, pars. 6.5 and 7.1 NR 465.26(2) (b) 3. and (c) NR 465.37(2) (c) NR 465.46(2) (b) 4. and (c) NR 465.47(2) (c) |
(23) | ASTM D1480-93 (1997) | Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer | 40 CFR part 75 Appendix D |
(24) | ASTM D1481-93 (1997) | Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer | 40 CFR part 75 Appendix D |
(25) | ASTM D1552-03 | Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method) | 40 CFR part 75 Appendices A and D NR 439.08(2) (b) |
(25m) | ASTM D1613-02 | Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products | NR 422.02(67m) |
(26) | ASTM D1826-94 (1998) | Standard Test Method for Calorific Value of Gases in Natural Gas Range by Continuous Recording Calorimeter | 40 CFR part 60 Appendix A, Method 19 40 CFR part 75 Appendices E and F NR 400.02(79) |
(26m) | ASTM D1835-03a | Standard Specification for Liquid Petroleum Gases | NR 462.02(36) (b) |
(27) | ASTM D1945-96 (2001) | Standard Test Method for Analysis of Natural Gas by Gas Chromatography | 40 CFR part 75 Appendices F and G |
(28) | ASTM D1946-90 (2000) | Standard Practice for Analysis of Reformed Gas by Gas Chromatography | 40 CFR part 75 Appendices F and G NR 460.10(2) (f) 1. a. |
(30) | ASTM D2013-01 | Standard Method of Preparing Coal Samples for Analysis | 40 CFR part 60 Appendix A, Method 19 40 CFR part 75 Appendix F NR 439.08(1) (b) NR 462, Table 6 |
(31) | ASTM D2015-96 | Standard Test Method for Gross Calorific Value of Coal and Coke by the Adiabatic Bomb Calorimeter | 40 CFR part 60 Appendix A, Method 19 40 CFR part 75 Appendices A, D, E and F |
(32) | ASTM D2197-98 (2002) | Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion | ANSI A135.5-2004 |
(33) | ASTM D2234/D2234M-03e1 | Standard Practice for Collection of a Gross Sample of Coal | 40 CFR part 60 Appendix A, Method 19 40 CFR part 75 Appendix F NR 439.08(1) (a) NR 439.085(2) (a) 1. NR 439.085(2) (b) 1. NR 439.085(2) (c) 1. NR 462, Table 6 |
(33) | ASTM D2234/D2234M-03e1 | Standard Practice for Collection of a Gross Sample of Coal | 40 CFR part 60 Appendix A, Method 19 40 CFR part 75 Appendix F NR 439.08(1) (a) NR 439.085(2) (a) 1. NR 439.085(2) (b) 1. NR 439.085(2) (c) 1. NR 462, Table 6 |
(34) | ASTM D2369-01e1 | Standard Test Method for Volatile Content of Coatings | 40 CFR part 60 Appendix A, Method 24, par. 6.2 |
Note: ASTM D2382 was discontinued in 1994, and replaced by ASTM D4809. | |||
(36) | ASTM D2486-00 | Standard Test Method for Scrub Resistance of Wall Paints | ANSI A135.5-2004 |
(37) | ASTM D2502-92 (1996) | Standard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils from Viscosity Measurements | 40 CFR part 75 Appendix G |
(38) | ASTM D2503-92 (1997) | Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure | 40 CFR part 75 Appendix G |
(39) | ASTM D2622-98 | Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry | 40 CFR part 75 Appendices A and D |
(39e) | ASTM D2697-86 (1998) | Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings | NR 465.26(2) (b) 1. NR 465.46(2) (b) 1. |
(39m) | ASTM D2879-10 | Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope | NR 419.045(5) (d) NR 422.142(5) (d) |
(40) | ASTM D2880-00 | Standard Specification for Gas Turbine Fuel Oils | NR 420.03(1) (a) |
(41) | ASTM D2986-95a (1999) | Standard Practice for Evaluation of Air Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test | 40 CFR part 60 Appendix A: Method 5, par. 7.1.1 Method 12, par. 7.1.1 Method 13A, par. 7.1.1.2 |
(41m) | ASTM D3172-89 (2002) | Standard Practice for Proximate Analysis of Coal and Coke | NR 439.098(1) (b) |
(42) | ASTM D3173-02 | Standard Test Method for Moisture in the Analysis Sample of Coal and Coke | 40 CFR part 60 Appendix A, Method 19 NR 439.08(1) (f) NR 462, Table 6 |
(43) | ASTM D3174-04 | Standard Test Method for Ash in the Analysis Sample of Coal and Coke from Coal | 40 CFR part 75 Appendix G NR 439.08(1) (e) |
(44) | ASTM D3176-89 (2002) | Standard Practice for Ultimate Analysis of Coal and Coke | 40 CFR part 75 Appendices A and F NR 439.08(1) (g) NR 439.098(1) (a) |
(45) | ASTM D3177-02 | Standard Test Methods for Total Sulfur in the Analysis Sample of Coal and Coke | 40 CFR part 60 Appendix A, Method 19 40 CFR part 75 Appendix A NR 439.08(1) (c) |
(46) | ASTM D3178-89 (1997) | Standard Test Methods for Carbon and Hydrogen in the Analysis Sample of Coal and Coke | 40 CFR part 75 Appendix G |
(47) | ASTM D3238-95 (2000) | Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method | 40 CFR part 75 Appendix G |
(47L) | ASTM D3683-94 (2000) | Standard Test Method for Trace Elements in Coal or Coke Ash by Atomic Absorption | NR 462, Table 6 |
(47m) | ASTM D3684-01 | Standard Test Method for Total Mercury in Coal by Oxygen Bomb Combustion/Atomic Absorption Method | NR 446.04(1) (b) NR 446.04(1) (c) 1. b. NR 446.07(1) NR 446.07(2) NR 446.08(1) (b) NR 446.08(1) (c) 2. NR 462, Table 6 |
(48) | ASTM D3792-99 | Standard Test Method for Water Content of Water-Reducible Paints by Direct Injection into a Gas Chromatograph | 40 CFR part 60 Appendix A, Method 24, par. 6.3 |
(49) | ASTM D4017-02 | Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method | 40 CFR part 60 Appendix A, Method 24, par. 6.4 |
(50) | ASTM D4052-96 (2002) | Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter | 40 CFR part 75 Appendix D |
(51) | ASTM D4057-95 (2000) | Standard Practice for Manual Sampling of Petroleum and Petroleum Products | 40 CFR part 75 Appendix D NR 439.08(2) (a) |
(52) | ASTM D4177-95 (2000) | Standard Practice for Automatic Sampling of Petroleum and Petroleum Products | 40 CFR part 75 Appendix D NR 439.08(2) (a) |
(53) | ASTM D4239-04a | Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High Temperature Tube Furnace Combustion Methods | 40 CFR part 60 Appendix A, Method 19 40 CFR part 75 Appendix A NR 439.08(1) (c) |
(54) | ASTM D4294-03 | Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectrometry | 40 CFR part 75 Appendices A and D NR 439.08(2) (b) |
(55) | ASTM D4809-00 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method) | 40 CFR part 75 Appendices D, E and F NR 460.10(2) (f) 2. |
(55b) | ASTM D4953-06 | Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method) | NR 419.045(5) (d) |
(55bg) | ASTM D5190-07 | Standard Test Method for Vapor Pressure of Petroleum Products (Automatic Method) | NR 419.045(5) (d) |
(55br) | ASTM D5191-10b | Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method) | NR 419.045(5) (d) |
(55g) | ASTM D5865-04 | Standard Test Method for Gross Calorific Value of Coal and Coke | NR 400.02(79) NR 439.08(1) (d) |
(55i) | ASTM D5965-02 | Standard Test Methods for Specific Gravity of Coating Powders | NR 465.47(2) (c) |
(55L) | ASTM D6053-00 | Standard Test Method for Determination of Volatile Organic Compound (VOC) Content of Electrical Insulating Varnishes | 40 CFR part 63, Subpart MMMM, Appendix A |
(55m) | ASTM D6093-97 (2003) | Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer | NR 465.26(2) (b) 1. NR 465.46(2) (b) 1. |
(55p) | ASTM D6323-98 (2003) | Standard Guide for Laboratory Subsampling of Media Related to Waste Management Activities | NR 462, Table 6 |
(55t) | ASTM D6522-00 | Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers and Process Heaters Using Portable Analyzers | NR 462, Table 5 |
(55v) | ASTM D6751-09 | Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels | NR 406.02(1) |
(55x) | ASTM D6784-02 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | NR 462, Table 5 |
(55c) | ASTM D5291-02 | Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants | 40 CFR part 63, Subpart MMMM, Appendix A |
(56) | ASTM E84-03 | Standard Test Method for Surface Burning Characteristics of Building Materials | ANSI A135.5-2004 |
(56d) | ASTM E711-87 (2004) | Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter | NR 462, Table 6 |
(56h) | ASTM E776-87 (2004) | Standard Test Method for Forms of Chlorine in Refuse-Derived Fuel | NR 462, Table 6 |
(56m) | ASTM E145-94 (2001) | Standard Specification for Gravity-Convection and Forced-Ventilation Ovens | 40 CFR part 63, Subpart PPPP, Appendix A |
(56p) | ASTM E871-82 (1998) | Standard Method of Moisture Analysis of Particulate Wood Fuels | NR 462, Table 6 |
(56t) | ASTM E885-88 (2004) | Standard Test Methods for Analyses of Metals in Refuse-Derived Fuel by Atomic Absorption Spectroscopy | NR 462, Table 6 |
(57) | ASTM G23-96 | Standard Practice for Operating Light-Exposure Apparatus (Carbon-Arc Type) With and Without Water for Exposure of Nonmetallic Materials | ANSI/AHA A135.5-1988 |