Current through Register Vol. XLI, No. 50, December 13, 2024
Section 45-40-4 - Applicability4.1. The owner or operator of a unit that has a maximum design heat input greater than 250 MMBtu/hr, except for any unit subject to a seasonal NOX trading program established under 40 CFR part 97 in accordance with a federal implementation plan set forth in 40 CFR § 52.38(b) or subject to a seasonal NOX trading program established under a SIP revision approved by the U.S. EPA as meeting the requirements of 40 CFR § 52.38(b), shall comply with the ozone season NOX emission limitation, and monitoring, recordkeeping and reporting requirements for ozone season emissions of NOX set forth in sections 5 and 6 below.4.2. Effective May 1, 2009, the owner or operator of a large NOX SIP Call engine shall comply with the ozone season NOX reduction, compliance plan, monitoring, recordkeeping and reporting requirements set forth in section 9 below.4.3. Effective May 1, 2009, the owner or operator of a kiln that meets the following applicability requirements shall comply with the ozone season NOX control standards, ozone season NOX compliance plan, reporting, monitoring and recordkeeping requirements set forth in section 10 below:4.3.a. Long dry kilns [GREATER THAN EQUALS TO] 12 TPH process rate;4.3.b. Long wet kilns [GREATER THAN EQUALS TO] 10 TPH process rate;4.3.c. Preheater kilns [GREATER THAN EQUALS TO] 16 TPH process rate; and4.3.d. Precalciner and preheater/precalciner kilns [GREATER THAN EQUALS TO] 22 TPH process rate.