W. Va. Code R. § 45-10A-2
Current through Register Vol. XLI, No. 50, December 13, 2024
Section 45-10A-2 - Definitions2.1. "ASTM Approved" means test methods and procedures approved and published by the American Society for Testing and Materials.2.2. "Combustion Source" means a source(s) subject to the standards set forth in section 5 of 45CSR10.2.3. "Continuous Emission Monitoring System" or "CEMS" means all equipment required for the determination of gas concentration or emission rate, installed, calibrated, operated and maintained as specified in 40 CFR Part 75, or 40 CFR Part 60, Appendix B, Performance Specification 2 or Performance Specification 7 and 40 CFR Part 60, Appendix F.2.4. "Excursion" means: (1) measured emissions exceeding the applicable standards set forth in sections 3, 4, and 5 of 45CSR10; or (2) operating parameters outside the range set forth in an approved monitoring plan, which may or may not result in measured emissions exceeding the applicable standards set forth in sections 3, 4, and 5 of 45CSR10.2.5. "Factor," in lbSO2/mmBTU, means the number, indicated in 45CSR10, subsection 3.1, 3.2, or 3.3, as appropriate, to be multiplied by the TDHI to calculate the maximum amount of sulfur dioxide permitted to be discharged to the atmosphere from all stacks located at one plant, expressed in units of pounds per hour.2.6. "Fuel Quality Analysis" means the sulfur content and the BTU content.2.7. "Pipeline Quality Natural Gas" means, for purposes of this rule only, natural gas with a sulfur content less than or equal to 20 grains per 100 dry standard cubic feet (dscf).2.8. Other words and phrases used in this rule, unless otherwise indicated, shall have the meaning ascribed to them in WV CSR § 45-10-2 or W. Va. Code § 22-5-1 et seq.W. Va. Code R. § 45-10A-2