Current through Register Vol. XLI, No. 50, December 13, 2024
Section 42-35-7 - Calibration and Verification of Standards and Testing Equipment Used by a Service Person or Service Agency7.1. A registered service person or service agency shall submit documentation with the initial registration application and renewal application that each field standard or piece of testing equipment used to perform the activities set forth in subsection 5.3 are calibrated and verified as to accuracy according to the following intervals, or whenever recalibrated: 7.1.a. Pharmacy Weight Kits, 5 years;7.1.b. Cast Iron Construction Weights ("b" ID number), 2 years;7.1.c. Coal Load Out Weights greater than 2,000 pounds, 5 years;7.1.d. Liquid Propane Gas Provers, 5 years;7.1.e. Provers over 200 gallons, 5 years;7.1.f. All other weighing and measuring devices, 1 year.7.2. The calibration and verification shall be performed by an accredited or NIST-traceable metrology laboratory.7.3. A registered service person or service agency shall have a copy of the current calibration documentation for each field standard or piece of testing equipment on hand and available for inspection at all times when performing any of the work in subsection 5.3 of this rule.