Current through Register Vol. XLI, No. 50, December 13, 2024
Section 36-47-7 - Use of insulated cable handling equipment7.1. Energized high-voltage cables must not be handled except when motor or shearer cables need to be trained. When cables need to be trained, high-voltage insulated gloves, mitts, hooks, tongs, slings, aprons, or other personal protective equipment capable of providing protection against shock hazard must be used to prevent direct contact with the cable. Any such equipment will be provided for by the employer.7.2. High-voltage insulated gloves, sleeves, and other insulated personal protective equipment must -- 7.2.a. Have a voltage rating of at least Class 1 (7,500 volts) that meets or exceeds ASTM F496-97, "Standard Specification for In-Service Care of Insulating Gloves and Sleeves" (1997).7.2.b. Be examined before each use for visible signs of damage.7.2.c. Be electrically tested every thirty days after initial use and, every year when properly stored and not in use. This must be done in accordance with publication ASTM F496-97.7.2.d. Be removed from the underground area of the mine or destroyed when damaged or defective.7.2.e. A record of insulated cable handling equipment must be made, kept in a book prescribed by the Director and made available to all interested persons upon request.7.2.f. Will be provided for by the employer.7.3. All electrical protective equipment used to handle energized high-voltage trailing cables shall be provided by the mine operator.