Current through Register Vol. XLI, No. 50, December 13, 2024
Section 36-18-5 - Pre-Operational Equipment Check5.1. Each working shift prior to its operation, all self-propelled section equipment to be operated during that shift shall be examined by the equipment operator for safety defects and/or unsafe conditions.5.2. Pre-Operational equipment examination required under 5.1 of this rule shall include the following items at a minimum. In addition, a list of these items shall be maintained on such equipment. 5.2.1. Stop/Start Control5.2.6. Automatic Emergency Brakes5.2.9. Canopies Where Required5.2.10. ATRS System and Boom Controls on Roof Bolting Machines5.3. Upon completion of the required examination under 5.1, if the equipment is determined to be unsafe, the individual making the examination shall report such unsafe equipment to his/her foreman. Any unsafe equipment shall be taken out of service and tagged until such unsafe condition is corrected. Before the unit of equipment can be placed back into service, the operator of such unit shall make a pre-operational examination.