Current through Register Vol. XLI, No. 50, December 13, 2024
Section 196-1-4 - Diesel-Powered Equipment Package4.1. All diesel-powered equipment shall be approved by the commission as a complete diesel-powered equipment package, which shall be subject to all of the requirements, standards and procedures set forth in this article.4.2. Diesel engines shall be certified or approved, as applicable, by MSHA and maintained in accordance with MSHA certification or approval and commission approval.4.3. All approved diesel powered equipment packages shall be listed on an inventory sheet submitted to the diesel commission with a copy maintained at the mine. The following information shall be provided on the inventory list:4.3.a. Name, Address and Permit Number of the Mine4.3.b. The phone number and name of the contact person responsible for maintenance and testing of the diesel equipment.4.3.c. The following specific information for each engine:4.3.c.i. Manufacturer, serial number and model of the equipment using the power-package4.3.c.ii. Manufacturer, Model number and serial number of the engine4.3.c.iii. MSHA 7E Approval Number4.3.c.iv. Rated HP and RPM4.3.c.v. DPM gr/hr rating and mg over m to the third power4.3.c.vi. Ventilation Rate4.3.d. The following specific information for each Filter System: 4.3.d.i. Manufacturer and model of the filter system4.3.d.ii. MSHA Efficiency Rating of the specific filter system(s) or an accepted third party rating4.3.d.iii. System type and composition (i.e., Passively Regenerated Cordierite, etc.)4.3.d.iv. The Manufacturer/Model of Regeneration system (if applicable)