W. Va. Code R. § 179-4-69

Current through Register Vol. XLI, No. 50, December 13, 2024

Section 179-4-69 - Dice Specifications

All dice used by the limited gaming facility licensee shall be in compliance with all of the following specifications:

69.1. The dice shall be formed in the shape of a perfect cube and of a size no smaller than 0.750 inches on each side nor larger than 0.775 inches on each side;

69.2. The name, trade name, or logo of the limited gaming facility licensee and a Lottery-specified identifier symbol shall be imprinted on or in each die used by the limited gaming facility licensee or license applicant;

69.3. The dice shall be transparent and made exclusively of cellulose, except for the following:

69.3.a. Spots;

69.3.b. The name, trade name, or logo of the limited gaming facility licensee and a Lottery-specified identifier symbol; and

69.3.c. The serial number or letters, or both;

69.4. The surface of each side of the die shall be perfectly flat and the spots contained in each side of the die shall be perfectly flush with the area surrounding the spots;

69.5. The edges and corners of each die shall be perfectly square and form 90 degree angles with each adjacent side;

69.6. The texture and finish of each side shall be exactly identical to the texture and finish of all other sides;

69.7. The weight of each die shall be equally distributed throughout the cube, and no side of the cube may be heavier or lighter than any other side of the cube;

69.8. The dice shall have 6 sides bearing white circular spots from 1 to 6, respectively, with the diameter of each spot equal to the diameter of every other spot on the die;

69.9. The dice shall have spots arranged so that all of the following provisions are satisfied:

69.9.a. The side containing one spot is directly opposite the side containing 6 spots;

69.9.b. The side containing two spots is directly opposite the side containing five spots; and

69.9.c. The side containing three spots is directly opposite the side containing four spots.

69.10. Each spot shall be placed on the die by drilling, or the equivalent, into the surface of the cube and filling the drilled out portion with a compound that is equal in weight to the weight of the cellulose drilled out and that forms a permanent bond with the cellulose cube.

69.11. Each Lottery-specified identifier symbol shall be printed in a manner that shall not change the weight or balance of the die.

W. Va. Code R. § 179-4-69