Section 434-335-280 - Logic and accuracy test conductThe county must provide adequate personnel to properly operate the ballot tabulation system. Whenever possible, the system shall be operated during the test by the same person or persons who will be responsible for operating the system on election day. The official logic and accuracy test shall be conducted as follows:
(1) Every ballot tabulator and scanner to be used in the primary or election shall be tested. Digital scan test decks shall be scanned during the official logic and accuracy test.(2) Undervotes recorded by a digital scan system used to resolve or adjudicate ballots digitally shall be auto-resolved. Some under-votes may be manually resolved to demonstrate the process.(3) Optical scan tabulators and digital scan tabulators not used to resolve or adjudicate ballots digitally shall be set to out-stack blank ballots, overvotes, and write-in votes.(4) A printout of the test results shall be produced and compared to the expected test results. If the test results do not match the expected test results, the reason for the discrepancy must be satisfactorily determined and corrections made, if necessary.(5) The upload of results to the secretary of state's office shall be tested and verified. If the upload of results cannot be completed, the results shall be transmitted to the office of the secretary of state through other means, and the county auditor shall work with the secretary of state to upload the results as soon as practicable.Wash. Admin. Code § 434-335-280
Amended by WSR 14-06-040, filed 2/26/14, effective 3/29/2014Amended by WSR 16-13-063, Filed 6/13/2016, effective 7/14/2016Amended by WSR 23-15-018, Filed 7/7/2023, effective 8/7/2023Statutory Authority: RCW 29A.04.611. 05-18-022, § 434-335-280, filed 8/29/05, effective 9/29/05.