Wash. Admin. Code § 344-12-265
Initial potential tests may be reported on forms furnished by the supervisor using the "one-point" method with a 45 degree slope for the plot. After a market is obtained and a pipe line is connected to the well, upon request of the supervisor, an operator shall make a "four-point" potential test and report on forms furnished by the supervisor. To establish comparable open flow capacity the "four-point" back pressure flows shall be taken in sequence from low to high flow. In the event the supervisor approves an alternate method of testing, all wells producing from a pool shall be tested in a uniform and comparable manner. In a like manner all natural gas wells hereafter completed shall be tested and the potential test reported. Where it has been determined that a natural gas well in any pool has a potential of 400,000 cubic feet per day or less, further potential tests shall not be required provided the operator periodically reports the shut-in pressure of the well.
Wash. Admin. Code § 344-12-265
Statutory Authority: RCW 78.52.050. 85-03-018 (Order 6, Resolution No. 10), § 344-12-265, filed 1/8/85. Statutory Authority: RCW 78.52.050 and chapter 78.52 RCW. 82-12-052 (Order 3, Resolution No. 7), § 344-12-265, filed 6/1/82.