Wash. Admin. Code § 296-96-00600

Current through Register Vol. 24-23, December 1, 2024
Section 296-96-00600 - Application of adopted standards and rules

Conveyances are required to comply with rules and standards that:

(1) Were in effect at the time of the original installation or at the time of any alteration;
(2) Apply to new and existing elevators (see ASME A17.1/CSA B44 1.1.3); and
(3) Apply to ASME A17.3, Safety Code for Existing Elevators and Escalators and chapter 296-96 WAC, Part D.

Copies of previous rules adopted by the department are available upon request.

If the department determines that a conveyance was installed or altered without a permit and inspection, the installation or alteration will be required to comply with the applicable rules and standards adopted by the department at the time the noncompliant installation or alteration was identified.

Wash. Admin. Code § 296-96-00600

Amended by WSR 13-24-066, filed 11/27/13, effective 1/1/2014
Amended by WSR 18-18-070, Filed 8/31/2018, effective 10/1/2018
Amended by WSR 23-17-141, Filed 8/22/2023, effective 10/2/2023

Statutory Authority: RCW 70.87.020, 70.87.030, 70.87.034, 70.87.120, 70.87.185, 70.87.190, 2002 c 98, 2003 c 143 and 2004 c 66. 04-12-047, § 296-96-00600, filed 5/28/04, effective 6/30/04. Statutory Authority: RCW 70.87.020, 70.87.030, 70.87.034, 70.87.120, 70.87.185 and chapter 70.87 RCW. 01-02-026, § 296-96-00600, filed 12/22/00, effective 1/22/01.