Wash. Admin. Code § 296-864-20005

Current through Register Vol. 24-23, December 1, 2024

Section 296-864-20005 - Make sure wheel components are compatible

(1) You must make sure tires and rim wheels are compatible before assembly.

(2) You must make sure split rim wheel components are not interchanged, except as provided in:

(a) The Occupational Safety and Health Administration (OSHA) and National Highway Traffic Safety Administration (NHTSA) charts, "Demounting and Mounting Procedures for Truck/Bus Tires" and "Multi-Piece Rim Matching Chart"; or

(b) The rim manual for that component.

Note:	Reprints of these charts, "Demounting and Mounting Procedures for Truck/Bus Tires" and "Multi-Piece Rim MatchingChart," are available:
	1. Through the WISHA Training and Outreach office at 360-902-5638.
	2. Through the OSHA area offices. The address and telephone number of the nearest OSHA area office can be obtained by looking in the local telephone directory under U.S. Government, U.S. Department of Labor, Occupational Safety and Health Administration.
	3. From the OSHA web site athttp://www.osha.gov/pls/publications/pubindex.continue. [File Link Not Available]
	4. Through U.S. Postal Service at:
	OSHA Publications Office U.S. Department of Labor Occupational Safety and Health Administration 200 Constitution Ave. N.W. Washington D.C. 20210 Telephone: 202-693-1888.

Wash. Admin. Code § 296-864-20005

Amended by WSR 15-24-102, Filed 12/1/2015, effective 1/5/2016

Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, 49.17.060. 04-20-079, § 296-864-20005, filed 10/5/04, effective 2/1/05.