Note: | 1. When evaluating air contaminants, keep in mind that oxygen deficient conditions may also occur due to: |
a. Processes such as fermentation, decomposition of organic matter, or combustion of fossil fuels. | |
b. Displacement by another gas such as nitrogen or carbon dioxide. | |
2. Rules for specific substances may contain additional requirements for determining employee exposure. | |
3. Samples from a representative group of employees may be used for other employees performing the same work activities, when the duration and level of exposure are similar. |
You may use area sampling to screen for the presence of an airborne contaminant; however, results from area sampling cannot be used if they do not adequately represent exposure of affected employees.
Note: | You should use methods of sampling and analysis that have been validated by the laboratory performing the analysis. |
The symbol | Is the ... |
E | Equivalent exposure for the mixture. When the value of E is greater than 1, an airborne hazard is present. |
C | Concentration of a specific airborne contaminant. |
L | TWA8, STEL, or ceiling limit for that airborne contaminant, from Table 3, Permissible Exposure Limits (PELs) for Airborne Contaminants. |
Note: | 1. When results from your exposure evaluation indicate an airborne hazard, follow requirements in WAC 296-841-20010 through 296-841-20020 of this chapter. |
2. When changes occur that increase the level of exposure to an airborne hazard, you may need to conduct a new exposure evaluation to make sure exposure controls and other protective measures are sufficient. |
Wash. Admin. Code § 296-841-20005
Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, 49.17.060. 07-05-062, § 296-841-20005, filed 2/20/07, effective 4/1/07; 04-18-079, § 296-841-20005, filed 8/31/04, effective 11/1/04; 03-20-115, § 296-841-20005, filed 10/1/03, effective 1/1/04.