Wash. Admin. Code § 296-835-130

Current through Register Vol. 24-23, December 1, 2024

Section 296-835-130 - Additional requirements for dip tanks used for specific processes

Summary.

Your responsibility: Safeguard employees working with dip tanks used for specific processes.

You must meet the requirements...	in this section:
Hardening or Tempering
Meet specific requirements if you use a hardening or tempering tank	WAC 296-835-13005
Electrostatic Equipment
Meet specific requirements if you use electrostatic equipment	WAC 296-835-13010
Flow Coating
Meet specific requirements if you use a flow coating process	WAC 296-835-13015
Roll Coating
Take additional precautions if your roll coating operation uses a liquid that has a flashpoint below 140°F (60°C)	WAC 296-835-13020
Vapor Degreasing
Provide additional safeguards for vapor degreasing tanks	WAC 296-835-13025
Spray Cleaning or Degreasing
Control liquid spray over an open surface cleaning or degreasing tank	WAC 296-835-13030

Wash. Admin. Code § 296-835-130

Amended by WSR 17-18-075, Filed 9/5/2017, effective 10/6/2017

Statutory Authority: RCW 49.17.010, [49.17].040, and[49.17].050 . 02-15-102, § 296-835-130, filed 7/17/02, effective 10/1/02.