Note: | There are two types of inspection, frequent or periodic, depending on how often they are done. |
Note: | The jack should be lubricated following the manufacturer's instructions. |
Table 4
Jack Inspection Requirements
Inspection Item | Frequent Inspection | Periodic Inspection |
Check all of the following items that apply to the jack: | ||
Improper pawl engagement | X | X |
Excessive pawl wear | X | X |
Chipped, cracked, or worn rack teeth | X | X |
Cracked or damaged housing | X | X |
Damaged, bent, or worn threads | X | X |
Leaking hydraulic fluid | X | X |
Scored or damaged plunger | X | X |
Improper functioning | X | X |
Free movement of swivel, heads, and caps | X | X |
Loose bolts or rivets | X | X |
Damaged or improperly assembled accessory equipment | X | X |
Rack wear or bending | X | X |
Other items as specified in the manufacturer's instructions | X | X |
Watch the jack during operation | X | X |
More detailed inspection required if a designated person determines any condition discovered is a hazard | X | |
Clean and check internal parts for wear or damage if inspection indicates an internal problem | X |
Wash. Admin. Code § 296-807-17020
Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, 49.17.060. 07-03-163, § 296-807-17020, filed 1/24/07, effective 4/1/07; 03-09-009, § 296-807-17020, filed 4/4/03, effective 8/1/03.