Section 296-67-001 - [Effective until 12/27/2024] Process safety management of highly hazardous chemicals(1) Purpose. This section contains requirements for preventing or minimizing the consequences of catastrophic releases of toxic, reactive, flammable, or explosive chemicals. These releases may result in toxic, fire, or explosion hazards.(2) Application. (a) This part applies to the following: (i) A process which involves a chemical at or above the specified threshold quantities listed in WAC 296-67-285, Appendix A;(ii) A process which involves a Category 1 flammable gas (as defined in WAC 296-901-14006 ) or a flammable liquid with a flashpoint below 100°F (37.8°C) on site in one location, in a quantity of 10,000 pounds (4535.9 kg) or more except for: (A) Hydrocarbon fuels used solely for workplace consumption as a fuel (e.g., propane used for comfort heating, gasoline for vehicle refueling), if such fuels are not a part of a process containing another highly hazardous chemical covered by this standard;(B) Flammable liquids with a flashpoint below 100°F (37.8°C) stored in atmospheric tanks or transferred which are kept below their normal boiling point without benefit of chilling or refrigeration.(b) This part does not apply to: (ii) Oil or gas well drilling or servicing operations; or(iii) Normally unoccupied remote facilities.Wash. Admin. Code § 296-67-001
Amended by WSR 14-07-086, filed 3/18/14, effective 5/1/2014Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, 49.17.060. 07-03-163, § 296-67-001, filed 1/24/07, effective 4/1/07. Statutory Authority: Chapter 49.17 RCW. 92-17-022 (Order 92-06), § 296-67-001, filed 8/10/92, effective 9/10/92.