Section 296-403A-190 - Safety standards for amusement rides and amusement structures(1) A certified amusement ride inspector will inspect amusement rides and structures for safety. Amusement rides and structures must comply with all applicable requirements of the National Electrical Code and this chapter, manufacturer's specifications, American Society of Testing and Materials (ASTM) Standards on Amusement Rides and Devices, insurance company inspection requirements, and the requirements established by the local authority having jurisdiction.(2) The amusement ride inspector must verify the correction of all deficiencies noted on the application for an amusement ride operating decal. The correction of any deficiencies must be completed within fifteen calendar days unless the inspector has determined that deficiencies are of a serious nature that will prohibit operation of the amusement ride or amusement structure. The period to correct deficiencies may be extended for a specific period at the discretion of the safety inspector and/or the department. The amusement ride inspector must report to the department any amusement ride or structure that is not allowed to operate because of serious safety deficiencies. Any deficiencies must be reinspected by the amusement ride inspector/company or other qualified inspector/company authorized by the original ride inspector/company.Wash. Admin. Code § 296-403A-190
Statutory Authority: RCW 19.28.010, 19.28.031, 19.28.061, 19.28.101, 19.28.171, 19.28.191, 19.28.201, 19.28.251, 19.28.271, 19.28.311, 19.28.321, 67.42.020, 67.42.025, 67.42.050, and chapters 19.28 and 67.42 RCW. 02-21-103, § 296-403A-190, filed 10/22/02, effective 11/22/02.