Statutes, codes, and regulations
Washington Administrative Code
Title 296 - Labor and Industries, Department ofChapter 296-307 - Safety standards for agricultureSPECIALIZED OPERATIONSPart U-3 - Other Hazardous MaterialsDipping and Coating Operations (Dip Tanks)
Ventilation
Section 296-307-45010 - Provide proper ventilation for the vapor area

Wash. Admin. Code § 296-307-45010

Download
PDF
Current through Register Vol. 24-23, December 1, 2024
Section 296-307-45010 - Provide proper ventilation for the vapor area
(1) The employer must make sure mechanical ventilation meets the requirements of one or more of the following standards:
(a) NFPA 34-1995, Standard for Dipping and Coating Processes Using Flammable or Combustible Liquids;
(b) ACGIH's "Industrial Ventilation: A Manual of Recommended Practice" (22nd ed., 1995);
(c) ANSI Z9.1-1971, Practices for Ventilation and Operation of Open-Surface Tanks and ANSI Z9.2-1979, Fundamentals Governing the Design and Operation of Local Exhaust Systems.

Note: Some, or all, of the consensus standards (such as ANSI and NFPA) may have been revised. If the employer complies with a later version of a consensus standard, the employer will be considered to have complied with any previous version of the same consensus standard.

(2) The employer must limit the vapor area to the smallest practical space by using mechanical ventilation;
(3) The employer must keep airborne concentration of any substance below twenty-five percent of its lower flammable limit (LFL);
(4) The employer must make sure mechanical ventilation draws the flow of air into a hood or exhaust duct;
(5) The employer must have a separate exhaust system for each dip tank if the combination of substances being removed could cause a:
(a) Fire;
(b) Explosion;

OR

(c) Potentially hazardous chemical reaction.

Reference: The employer needs to keep employee exposure within safe levels when the liquid in a dip tank creates an exposure hazard. See Respiratory hazards, chapter 296-307 WAC, Part Y-6.

Note: The employer may use a tank cover or material that floats on the surface of the liquid to replace or assist ventilation. The method or combination of methods selected by the employer has to maintain the airborne concentration of the hazardous material and the employee's exposure within safe limits.

Wash. Admin. Code § 296-307-45010

Amended by WSR 20-21-091, Filed 10/20/2020, effective 11/20/2020

Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, 49.17.060. WSR 05-01-166, § 296-307-45010, filed 12/21/04, effective 4/2/05; WSR 03-10-068, § 296-307-45010, filed 5/6/03, effective 8/1/03.