Section 296-307-41505 - Marking containers used in cylinder systems(1) Containers must be marked according to DOT regulations. Additional markings that do not conflict with DOT regulations may be used.(2) Each container must be marked with its water capacity in pounds or other identified unit of weight.(3) Exception: If the employer is the only one who fills and maintains the container and if the water capacity of the container is identified by a code, subsection (2) of this section does not apply.(4) Each container must be marked with its tare weight in pounds or other identified unit of weight including all permanently attached fittings but not the cap.Wash. Admin. Code § 296-307-41505
Amended by WSR 20-21-091, Filed 10/20/2020, effective 11/20/202097-09-013, recodified as § 296-307-41505, filed 4/7/97, effective 4/7/97. Statutory Authority: RCW 49.17.040,[49.17.]050 and [49.17.]060. 96-22-048, § 296-306A-41505, filed 10/31/96, effective 12/1/96.