Section 296-307-41017 - Container locations The employer must ensure that containers are located according to the following:
(1) Containers and first stage regulating equipment are located outdoors. Containers may be located indoors under any of the following conditions:
(a) In buildings used exclusively for container charging, vaporization pressure reduction, gas mixing, gas manufacturing, or distribution;(b) When portable use is necessary and meets the requirements of WAC 296-307-41509;(c) LP-gas fueled stationary or portable engines that meet the requirements of WAC 296-307-42521 or 296-307-42523;(d) LP-gas fueled industrial trucks that meet the requirements of WAC 296-307-42525;(e) LP-gas fueled vehicles garaged according to WAC 296-307-42527; or(f) Containers awaiting use or resale when stored according to WAC 296-307-430.(2) Each individual container is located away from the nearest important building, group of buildings, or line of adjoining property that may be built on, according to Table U-1. TABLE U-1
Minimum Distances
| Watercapacity percontainer | ConUnderground | tainersAbove-ground | Betweenabove-groundcontainers |
| Less than |
| 125 galsa | 10 feet | None | None |
| 125-250 gals | 10 feet | 10 feet | None |
| 251-500 gals | 10 feet | 10 feet | 3 feet |
| 501-2,000 gals | 25 feetb | 25 feetb | 3 feet |
| 2,001-30,000 gals | 50 feet | 50 feet | 5 feet |
| 30,001-70,000 gals | 50 feet | 75 feet | 1/4 of sum of diameters of adjacent containers |
| 70,001-90,000 gals | 50 feet | 100 feet | 1/4 of sum of diameters of adjacent containers |
(a) If the total water capacity of a multicontainer installation at a consumer site is 501 gallons or more, the minimum distance must comply with this table, applying the aggregate capacity instead of the capacity per container. For multiple installations, installations must be at least twenty-five feet apart. Do not apply the MINIMUM DISTANCES BETWEEN ABO-VEGROUND CONTAINERS to such installations.(b) Distance requirements may be reduced to 10 feet for a single container of 1200 gallons water capacity or less, if the container is at least 25 feet from any other LP-gas container of more than 125 gallons water capacity.(c) In buildings devoted exclusively to gas manufacturing and distributing operations, the distances may be reduced if no containers of more than 500 gallons water capacity are located closer than ten feet to gas manufacturing and distributing buildings.(3) Containers installed for use must not be stacked one above the other.(4) In industrial installations involving containers of 180,000 gallons total water capacity or more, where serious exposures from the container to adjacent properties are common, firewalls or other means of protection designed and constructed according to good engineering practices are required.(5) Readily ignitible material such as weeds and long dry grass is removed within ten feet of any container.(6) The minimum separation between LP-gas containers and flammable liquid tanks is twenty feet; the minimum separation between a container and the centerline of the dike is ten feet. | Exception: | This does not apply when LP-gas containers of 125 gallons or less capacity are installed adjacent to Class III flammable liquid tanks of 275 gallons or less capacity. |
(7) The accumulation of flammable liquids under adjacent LP-gas containers is prevented by a means such as diking, diversion curbs, or grading.(8) When dikes are used with flammable liquid tanks, no LP-gas containers are located within the diked area.Wash. Admin. Code § 296-307-41017
Amended by WSR 20-21-091, Filed 10/20/2020, effective 11/20/2020Statutory Authority: RCW 49.17.040. 98-24-096, § 296-307-41017, filed 12/1/98, effective 3/1/99. 97-09-013, recodified as § 296-307-41017, filed 4/7/97, effective 4/7/97. Statutory Authority: RCW 49.17.040, [49.17.]050 and [49.17.]060. 96-22-048, § 296-306A-41017, filed 10/31/96, effective 12/1/96.