Section 16-302-230 - Isolation requirements for alfalfa seed certificationIsolation requirements for the production of alfalfa seed crop are as follows:
(1) Alfalfa seed crop for certification must be isolated from all other alfalfa varieties or fields of the same variety not meeting varietal purity requirements for certification as follows: | Fields less than five acres | Fields five acres or more |
Foundation | 900 feet | 600 feet |
Registered | 450 feet | 300 feet |
Certified | 165 feet | 165 feet |
(2) Isolation between different classes (generations) of the same variety of alfalfa seed crop must be as follows: Class Being Produced | Distance required from fields planted with: | Fields less than five acres | Fields five acres or more |
Foundation | Foundation or Registered | 225 feet | 150 feet |
Registered | Registered or Certified | 115 feet | 75 feet |
Certified | Certified | 75 feet | 45 feet |
(3) In cases where an adjoining field is planted with a different variety of alfalfa, or alfalfa of a lower class, isolation may be obtained by measuring off the required strip in the certified seed crop field. This isolation strip may be mowed for hay or it may be harvested for uncertified seed under the following conditions: (a) The grower must apply for certification of the entire alfalfa seed field and clearly stake off the isolation strip. The entire field must pass all certification requirements, except for isolation at time of inspection. The field report will show rejection due to lack of isolation.(b) The grower must harvest and deliver to a department approved conditioning plant the seed from the certified portion of the field separately from the seed from isolation strip. After the seed is weighed and lotted in, the weight of the seed from the isolation strip is to be reported to the seed program. At this time the seed program records will indicate the field has passed certification.(4) Isolation is not required in an alfalfa seed field producing certified class seed when the isolation zone is less than ten percent of the entire field being certified if there is a clear ten-foot line of demarcation between adjacent varieties. The isolation zone is the area calculated by the length of the common border with other varieties by average width of the certified field falling within the one hundred sixty-five-foot isolation distance requirement.Wash. Admin. Code § 16-302-230
Statutory Authority: RCW 15.49.005, 15.49.081, 15.49.310, 15.49.370(3) and chapter 17.24 RCW. 00-24-077, § 16-302-230, filed 12/4/00, effective 1/4/01.