9 Va. Admin. Code § 5-40-3890

Download

PDF

Current through Register Vol. 41, No. 4, October 8, 2024

Section 9VAC5-40-3890 - Control technology guidelines

A. Prime application. The control technology should consist of one or more of the following:

1. Use of electrodeposited waterborne coatings.

2. Use of other waterborne coatings.

3. Use of lower solvent (higher solids) organic solvent-borne systems.

4. Carbon adsorption.

5. Incineration.

6. Any technology of equal or greater control efficiency when compared to the use of a coating complying with 9VAC5-40-3880 A 1, provided such technology is approved by the board.

B. Guidecoat application. The control technology should consist of one or more of the following:

1. Use of waterborne coatings;

2. Use of lower solvent (higher solids) organic solvent-borne systems;

3. Carbon adsorption; and

4. Incineration; or

5. Any technology of equal or greater control efficiency when compared to the use of a coating complying with 9VAC5-40-3880 B 1, provided such technology is approved by the board.

C. Topcoat application. The control technology should consist of one or more of the following:

1. Use of waterborne coatings;

2. Use of lower solvent (higher solids) organic solvent-borne systems;

3. Carbon adsorption; and

4. Incineration; or

5. Any technology of equal or greater control efficiency when compared to the use of a coating complying with 9VAC5-40-3880 C 1, provided such technology is approved by the board.

D. Final repair application. The control technology should consist of one or more of the following:

1. Use of lower solvent (higher solids) organic solvent borne systems;

2. Carbon adsorption; and

3. Incineration; or

4. Any technology of equal or greater control efficiency when compared to the use of a coating complying with 9VAC5-40-3880 D 1, provided such technology is approved by the board.

E. Anti-chip coating application. The control technology should consist of one or more of the following:

1. Use of electrodeposited waterborne coatings;

2. Use of other waterborne coatings;

3. Use of high solids coatings;

4. Use of powder coatings;

5. Carbon adsorption; and

6. Incineration; or

7. Any technology of equal or greater control efficiency when compared to the use of a coating complying with 9VAC5-40-3880 E 1, provided such technology is approved by the board.

9 Va. Admin. Code § 5-40-3890

Derived from VR120-04-2804, eff. July 1, 1991.

Statutory Authority

§§ 10.1-1307 and 10.1-1308 of the Code of Virginia.