9 Va. Admin. Code § 5-40-2260

Current through Register Vol. 41, No. 4, October 8, 2024

Section 9VAC5-40-2260 - Definitions

A. For the purpose of these regulations and subsequent amendments or any orders issued by the board, the words or terms shall have the meanings given them in subsection C of this section.

B. As used in this article, all terms not defined here shall have the meanings given them in 9VAC5 Chapter 10 (9VAC5-10-10 et seq.), unless otherwise required by context.

C. Terms defined.

"Woodworking operation" means any operation involving the generation of small wood waste particles (shavings, sanderdust, sawdust, etc.) by any kind of mechanical manipulation of wood, bark, or wood byproducts. Includes, but is not limited to, sawing, planing, chipping, shaping, moulding, hogging, lathing and sanding. Also includes any woodworking waste collection operation.

9 Va. Admin. Code § 5-40-2260

Derived from VR120-04-1702, eff. January 1, 1985.

Statutory Authority

§§ 10.1-1307 and 10.1-1308 of the Code of Virginia.