9 Va. Admin. Code § 20-121-140

Current through Register Vol. 41, No. 4, October 8, 2024
Section 9VAC20-121-140 - Management of spills of regulated medical waste
A. Any person or facility handling, generating, storing, transporting, transferring, treating, or disposing of regulated medical waste shall immediately address all spills of regulated medical waste, incidents or emergencies, maintenance events, and nonconformances that could have an impact on the management of regulated medical waste at the facility.
B. Anyone handling regulated medical waste shall maintain a spill containment and cleanup kit onsite within the vicinity of any area where regulated medical waste is managed, and the location of the kit shall provide for rapid and efficient cleanup of spills anywhere within the area. All vehicles transporting regulated medical wastes are required to carry a spill containment and clean up kit in the vehicle whenever regulated medical wastes are conveyed. A spill containment and cleanup kit shall consist of at least the following items:
1. Material designed to absorb spilled liquids, and the amount of absorbent material shall be that having a capacity, as rated by the manufacturer, of one gallon of liquid for every cubic foot of regulated medical waste that is normally managed in the area for which the kit is provided or 10 gallons, whichever is less;
2. In a sprayer capable of dispersing its charge in a mist and a stream at a distance, at least one gallon of an EPA-registered hospital grade disinfectant effective against mycobacteria, unless it can be demonstrated that an alternate EPA-registered disinfectant is protective of human health and the environment and is appropriate for the type of regulated medical waste managed and surfaces being disinfected;
3. Enough red plastic bags to double enclose at least 150% of the maximum load managed (up to a maximum of 500 bags) that meet the applicable requirements of 49 CFR Part 173 , including the ASTM 125 pound drop test for filled bags (D959) or an exemption approved by the U.S. Department of Transportation and are accompanied by seals and labels. These bags shall be large enough to overpack any box or container normally used for regulated medical waste management by that generator, handler, or facility;
4. Appropriate personal protective equipment, such as puncture and leak resistant gloves, safety glasses or face shield, protective coveralls or bib, protective footwear, and mask or respiratory protection as needed; and
5. For vehicles only, a first aid kit, fire extinguisher, boundary marking tape, lights, and other appropriate safety equipment.
C. Following any spill or release of regulated medical waste or its discovery, the following procedures shall be implemented:
1. Take appropriate precautions to ensure personnel do not come into contact with any contaminants by wearing appropriate personal protective equipment.
2. Repackage spilled regulated medical waste in accordance with the packaging requirements in 9VAC20-121-110.
3. Transport any regulated medical waste by a transporter that meets the requirements of 9VAC20-121-150.
4. Clean and disinfect all areas and materials having been contacted by regulated medical waste using an EPA-registered hospital grade disinfectant effective against mycobacteria in accordance with manufacturer's label instructions, unless it can be demonstrated that an alternate EPA-registered disinfectant is protective of human health and the environment and is appropriate for the type of regulated medical waste managed and surfaces being disinfected.
5. Take necessary steps to replenish the spill containment and cleanup kit.

9 Va. Admin. Code § 20-121-140

Derived from Virginia Register Volume 39, Issue 13, eff. 3/15/2023.

Statutory Authority: § 10.1-1402 of the Code of Virginia; 42 USC § 6941 et seq.; 40 CFR Part 257.