4 Va. Admin. Code § 25-130-816.104

Current through Register Vol. 41, No. 8, December 2, 2024

Section 4VAC25-130-816.104 - Backfilling and grading; thin overburden

(a) Thin overburden exists when spoil and other waste materials available from the entire permit area is insufficient to restore the disturbed area to its approximate original contour. Insufficient spoil and other waste materials occur where the overburden thickness times the swell factor, plus the thickness of other available waste materials, is less than the combined thickness of the overburden and coal bed prior to removing the coal, so that after backfilling and grading the surface configuration of the reclaimed area would not:

(1) Closely resemble the surface configuration of the land prior to mining; or

(2) Blend into and complement the drainage pattern of the surrounding terrain.

(b) Where thin overburden occurs within the permit area, the permittee at a minimum shall:

(1) Use all spoil and other waste materials available from the entire permit area to attain the lowest practicable grade, but not more than the angle of repose; and

(2) Meet the requirements of 4VAC25-130-816.102(a)(2) through (j).

4 Va. Admin. Code § 25-130-816.104

Derived from VR480-03-19 § 816.104, eff. December 15, 1981; amended, eff. June 28, 1982; October 28, 1982; December 14, 1982; October 11, 1983; December 27, 1983; May 8, 1984; June 22, 1984; August 2, 1984; October 16, 1985; January 7, 1987; July 22, 1987; November 25, 1987; October 12, 1988; December 26, 1990; July 1, 1991; July 17, 1991; November 20, 1991; July 7, 1992; May 5, 1993; October 19, 1994; Virginia Register Volume 15, Issue 6, eff. January 6, 1999.

Statutory Authority

§§ 45.1-161.3 and 45.1-230 of the Code of Virginia.