C. Connectivity requirements. All streets in a development as shown in a plan of development shall be considered for acceptance into the secondary system of state highways as one or multiple network additions. However, streets with a functional classification of collector and above may be eligible for acceptance as individual streets. For the purposes of this subsection, connection shall mean a street connection to an adjacent property or a stub out that will allow for future street connection to an adjacent property.
The connectivity requirements of this chapter shall not apply to the following: a frontage road or reverse frontage road as defined in the Access Management Regulations (24VAC-30-73), streets petitioned for acceptance into the secondary system of state highways through the Rural Addition Program pursuant to §§ 33.2-335 and 33.2-336 of the Code of Virginia, or streets petitioned for acceptance into the secondary system of state highways through the Commonwealth Transportation Board's Rural Addition Policy provided such streets were constructed prior to January 1, 2012.
1. Stub out connection standard. If a stub out or stub outs maintained by the department adjoin the property of a development with a network addition or individual street proposed for acceptance into the secondary system of state highways, such network addition or individual street must connect to such stub out or stub outs to be eligible for acceptance into the secondary system of state highways. The district administrator may waive this requirement if the existing stub out is of such design as to make such a connection unsafe.2. Multiple connections in multiple directions standard. The streets within a network addition may be accepted into the secondary system of state highways if the network addition provides at least two external connections, one of which must be to a publicly maintained highway and the other providing a connection to a different highway or a stub out to an adjoining property. Local street stub outs generally should not exceed 500 feet in length. If a stub out is constructed, the applicant shall post a sign in accordance with the department's standards that indicates that such stub out is a site for a future roadway connection. Nothing in this chapter shall be construed as to prohibit a stub out from providing service to lots within a development. The district administrator's designee shall waive or modify the second required connection of this standard if one or more of the following situations renders the provision of such connection impracticable:
a. The adjoining property is completely built out, its state is such that redevelopment within 20 years is unlikely, and there is no stub out (either constructed or platted) to the property served by the network addition;b. The adjoining property is zoned for a use whose traffic is incompatible with the development being served by the network addition, providing, however, that in no case shall retail, residential, or office uses be considered incompatible with other retail, residential, or office uses; orc. There is no reasonable connection possible to adjoining property or adjacent highways due to a factor outside the control of the developer of the network addition, such as the presence of conservation easements not put in place by the developer of the network addition, water features such as rivers or lakes, jurisdictional wetlands, grades in excess of 15% whose total elevation change is greater than five feet, limited access highways, railroads, or government property to which access is restricted.3. Additional connections standard. Network additions providing direct access to (i) more than 200 dwelling units or (ii) lots whose trip generation is expected to be over 2,000 VPD may be accepted into the secondary system of state highways if the network addition provides an additional external connection beyond that required under subdivision 2 of this subsection for each additional 200 dwelling units or 2,000 VPD or portion of each over and above the initial 200 dwelling units or 2,000 VPD. For the purposes of this requirement, each external connection of collector facilities that are elements of the county's transportation plan and to which there is no direct lot access provided counts as two external connections. The district administrator's designee shall waive or modify this additional connections standard if one or more of the following situations renders the provision of such connection impracticable: a. The adjoining property is completely built out, its state is such that redevelopment within 20 years is unlikely, and there is no stub out (either constructed or platted) to the property served by the network addition;b. The adjoining property is zoned for a use whose traffic is incompatible with the development being served by the network addition, providing, however, that in no case shall retail, residential, or office uses be considered incompatible with retail, residential, or office uses;c. In developments with a median density of more than eight lots per acre or with a FAR of 0.4 or higher, where the number of connections provided would be contrary to the public interest; ord. There is no reasonable connection possible to adjoining property or adjacent highways due to a factor outside the control of the developer of the network addition, such as the presence of conservation easements not put in place by the developer of the network addition, water features such as rivers or lakes, jurisdictional wetlands, grades in excess of 15% whose total elevation change is greater than five feet, limited access highways, railroads, or government property to which access is restricted.4. Individual street standard. Streets that are not part of a network addition shall be accepted into the secondary system of state highways upon petition by the local governing body as long as they meet the requirements of the applicable design standard and one terminus of the street is an intersection with a roadway that is part of the existing publicly maintained highway network and the other terminus is either an intersection with a roadway that is part of the existing publicly maintained highway network or a stub out to an adjoining property. Streets considered for individual acceptance should be (i) streets that provide a connection between two existing publicly maintained streets or (ii) streets with a functional classification as collector or higher.5. Connectivity exceptions. Where the above standards for waiver or modification have been met, the connectivity requirements for a network addition shall be waived or modified by the district administrator's designee. The developer shall submit any request for connectivity waiver or modification to the district administrator's designee with a copy to the local official. The district administrator's designee shall respond to requests for connectivity exceptions within 30 calendar days of receipt of a request. For projects where a scoping meeting pursuant to the Traffic Impact Analysis Regulations (24VAC30-155) will be held, requests for exceptions and supporting data should be presented and discussed.
6. In instances where there is potential for conflict between this chapter and the Access Management Regulations: Minor Arterials, Collectors, and Local Streets (24VAC30-73), the following shall apply: a. For streets with a functional classification of collector where additional connections necessary to meet the connectivity requirements of this chapter cannot be accommodated within the applicable spacing standards and cannot otherwise be met through connections to lower order roadways or stub outs, such spacing standards shall be modified by the district administrator's designee to allow for such connection. Such connection or connections shall be required to meet intersection sight distance standards specified in the Road Design Manual, 2011 (VDOT).b. For streets with a functional classification of minor arterial where additional connections necessary to meet the connectivity requirements of this chapter cannot be accommodated within the applicable spacing standards and cannot otherwise be met through connections to lower order roadways or stub outs, the district administrator's designee shall, in consultation with the developer and the local official, either modify the applicable spacing standards to allow for such connection or connections, or modify the connectivity requirements of this chapter to account for the inability to make such connection. Such connection shall be required to meet intersection sight distance as specified in the Road Design Manual, 2011 (VDOT).c. For streets with a functional classification of principal arterial where additional connections necessary to meet the external connectivity requirements of this chapter cannot be accommodated within the applicable spacing standards and cannot otherwise be met through connections to lower order roadways or stub outs, the connectivity requirements shall be modified by the district administrator's designee to account for the inability to make such connection.7. Failure to connect. If a local government approves a subdivision plat for a new development that does not connect to a stub out or stub outs in an adjacent development and such development's network addition or individual street would meet the applicable requirements of this chapter if it connected to a stub out or stub outs in the adjacent development, the network addition or individual street may or may not be accepted into the secondary system of state highways for maintenance pursuant to the authority granted to the district administrators in accordance with 24VAC30-92-100.The amended version of this section by Virginia Register Volume 40, Issue 19, eff. 5/6/2024 is not yet available.