Current through Register Vol. 41, No. 8, December 2, 2024
Section 16VAC25-60-130 - Construction industry standardsA. The occupational safety or health standards adopted as rules or regulations by the Virginia Safety and Health Codes Board either directly, or by reference, from 29 CFR Part 1926 shall apply by their own terms to all employers and employees engaged in either construction work or construction related activities covered by the Virginia State Plan for Occupational Safety and Health.B. The employer shall comply with the manufacturer's specifications and limitations applicable to the operation, training, use, installation, inspection, testing, repair and maintenance of all machinery, vehicles, tools, materials and equipment, unless specifically superseded by a more stringent corresponding requirement in 29 CFR Part 1926. The use of any machinery, vehicle, tool, material or equipment that is not in compliance with any applicable requirement of the manufacturer is prohibited, and shall either be identified by the employer as unsafe by tagging or locking the controls to render them inoperable or be physically removed from its place of use or operation.C. For the purposes of the applicability of such Part 1926 standards, the key criteria utilized to make such a decision shall be the activities taking place at the worksite, not the primary business of the employer. Construction work shall generally include any building, altering, repairing, improving, demolishing, painting or decorating any structure, building, highway, or roadway and any draining, dredging, excavation, grading or similar work upon real property. Construction also generally includes work performed in traditional construction trades such as carpentry, roofing, masonry work, plumbing, trenching and excavating, tunneling, and electrical work. Construction does not include maintenance, alteration or repair of mechanical devices, machinery, or equipment, even when the mechanical device, machinery or equipment is part of a pre-existing structure.D. The employer shall comply with the Virginia Department of Transportation (VDOT) Work Area Protection Manual in lieu of the federal Manual on Uniform Traffic Control Devices (Part VI of the MUTCD, 2009 Edition, Revision 1 dated May 2012 and Revision 2 dated May 2012, or Part VI of the MUTCD, Millennium Edition - referenced in 16VAC25-175-1926.200 and 16VAC25-175-1926.201) when working under a contract for construction, repair, or maintenance between the employer and the Commonwealth; agencies, authorities, or instrumentalities of the Commonwealth; or any political subdivision or public body of the Commonwealth when such contract stipulates employer compliance with the VDOT Work Area Protection Manual in effect at the time of contractual agreement.E. Certain standards of 29 CFR Part 1910 have been determined by federal OSHA to be applicable to construction and have been adopted for this application by the board.F. The standards adopted from 29 CFR Part 1910.19 and 29 CFR Part 1910.20 containing respectively, special provisions regarding air contaminants and requirements concerning access to employee exposure and medical records shall apply to construction work as well as general industry.16 Va. Admin. Code § 25-60-130
Derived from VR425-02-95 §3.2, eff. July 1, 1994; amended, Virginia Register Volume 22, Issue 25, eff. September 21, 2006; Amended, Virginia Register Volume 36, Issue 04, eff. 11/15/2019.Statutory Authority: § 40.1-22 of the Code of Virginia; Occupational Safety and Health Act of 1970 ( P.L. 91-596).