Section R877-23V-6 - Issuance of In-Transit Permits Pursuant to Utah Code Ann. Section 41-3-305(1)(a) Transported semitractors are piggy-backed when all of the semitractors being transported are touching the ground.(b) Each piggy-backed vehicle must have a separate in-transit permit or be properly registered for operation in Utah.(2) In-transit permits may not be issued for loaded motor vehicles over 12,000 pounds gross laden weight.(3) A semitractor hauling unlicensed trailers must obtain an in-transit permit for any trailer in contact with the ground.(4) Subject to Subsections (5) and (6), the following entities may issue in-transit permits: (a) a licensed dealer that is primarily engaged in the business of auctioning consigned motor vehicles to other dealers or the public; and(b) a state or local government agency that is engaged in the business of auctioning motor vehicles to dealers or the public.(5) An entity issuing an in-transit permit under Subsection (4) shall maintain records of all in- transit permits obtained from the division. These records shall include:(a) vehicle purchaser information;(b) vehicle identification number; and(c) evidence that the purchaser has met the requirements for issuance of the in-transit permit.(6) An entity described in Subsection (4) that fails to maintain the records required under Subsection (5) may be prohibited from issuing in-transit permits.Utah Admin. Code R877-23V-6