Section R746-312-17 - Interconnection-related Agreements(1) Contents of a standard interconnection agreement are listed in Subsection R746-312-17(2).(2) Each standard form interconnection agreement shall, at the least, contain the following: (a) a requirement that the generating facility must be inspected by a local building code official before its operation in parallel with the public utility to ensure compliance with applicable local codes.(b) provisions that permit the public utility to inspect the interconnection customer's generating facility and its component equipment, and the documents necessary to ensure compliance with Rule R746-312. The customer shall notify the public utility as required by this rule before initially placing customer equipment and protective apparatus in service, and the public utility may have personnel present on the in-service date. If the generating system is subsequently modified to increase its gross power rating, the customer must notify the public utility by submitting a new application specifying the modifications in accordance with the level of review required for the application.(c) a provision that the customer is responsible for protecting the generating equipment, inverters, protective devices, and other system components from damage from the normal and abnormal conditions and operations that occur on the public utility system in delivering and restoring power; and is responsible for ensuring that the generating facility equipment is inspected, maintained, and tested in accordance with the manufacturer's instructions to ensure that it is operating correctly and safely.(d) a provision that the customer shall hold harmless and indemnify the public utility for each loss to third parties resulting from the operation of the generating facility, except when the loss occurs due to the negligent actions of the public utility; and a provision that the public utility shall hold harmless and indemnify the customer for each loss to third parties resulting from the operation of the public utility's system, except when the loss occurs due to the negligent actions of the customer.(e) Insurance: (i) If an interconnection customer whose generating facility is no greater than two megawatts in size complies with the provisions of the interconnection request approval, interconnection agreement, and standards identified in Section 54-15-106, a public utility may not require that interconnection customer to buy additional liability insurance.(ii) Other interconnection customers are required to buy prudent amounts of general liability insurance in an amount sufficient to protect other parties from any loss, cost, claim, injury, liability, or expense, including reasonable attorney fees, relating to or arising from any act or omission in its performance of this rule or the interconnection agreement. Neither party may seek redress from the other party in an amount greater than the amount of direct damage incurred. An interconnection customer of sufficient credit-worthiness may propose to self-insure for these liabilities and the proposal may not be unreasonably rejected.(f) identification of any fees or charges approved pursuant to this rule or applicable law.Utah Admin. Code R746-312-17
Amended by Utah State Bulletin Number 2017-2, effective 12/22/2016Amended by Utah State Bulletin Number 2024-08, effective 4/9/2024