Section R714-160-14 - Electrical System(1) When inspecting the electrical system of a vehicle, the inspector shall: (a) check the horn; and (i) advise the customer when the horn is not securely fastened; or(ii) issue a rejection inspection certificate when the horn does not function properly or is not audible under normal conditions at a distance of at least 200 feet;(b) check the electrical switches and wiring; and(i) advise the customer when:(A) electrical switches fail to function as designed for OEM required equipment;(B) connections show signs of corrosion; or(C) permanent connection wires are not soldered and insulated; or(ii) issue a rejection inspection certificate when wiring insulation is worn or rubbed bare;(c) check the automatic or manual transmission safety starting switch; and(i) issue a rejection inspection certificate when: (A) the starter operates in any gear other than "P" or "N" for an automatic transmission; or(B) the vehicle starter operates without the clutch depressed for a manual transmission, when equipped with a neutral safety switch; and(d) check for battery securement; and (i) issue a rejection inspection certificate when a battery is not properly secured.Utah Admin. Code R714-160-14
Adopted by Utah State Bulletin Number 2016-20, effective 9/27/2016