Utah Admin. Code 710-14-5

Current through Bulletin No. 2024-21, November 1, 2024
Section R710-14-5 - Inspection Procedures and Criteria
(1) The AHJ shall use the inspection check list approved by the Board.
(2) A food truck shall comply with the following standards to pass inspection:
(a) no patrons are allowed inside the food truck;
(b) patron seating may not be located within any food truck or mobile or temporary cooking vehicle;
(c) gas fired appliances shall be secured to the food truck;
(d) generators may be used according to their listing and are not required to be mounted on the food truck; and
(e) a listed LPG liquid petroleum gas detector shall be installed in the truck at floor level near the cooking equipment.
(3) The AHJ may re-inspect a food truck, after it has passed an inspection, for the following items:
(a) damage to truck or equipment;
(b) removal or replacement of appliances or other equipment;
(c) additions to the food truck that were not included in the original inspection;
(d) remodel of the food truck;
(e) issues not included in the original inspection such as:
(i) free standing LPG tanks;
(ii) generator location;
(iii) cooking outside;
(iv) exterior seating; or
(v) truck placement;
(f) parking and location;
(g) cleanliness issues that create a potential fire hazard such as an accumulation of grease;
(h) imminent hazards to life or property; or
(i) current tag on fire extinguishing system.
(4) If a food truck passes an inspection, the AHJ will provide the food truck operator with a fire safety inspection sticker.

Utah Admin. Code R710-14-5

Adopted by Utah State Bulletin Number 2018-2, effective 12/28/2017