Section R392-700-9 - Tanning Facility Sanitation(1) The operator shall maintain walls, floors, ceilings, restrooms, and equipment of a tanning facility in good repair and in a clean and sanitary condition. (2) The operator shall clean each body contact surface of a tanning device, including each seating surface and doorknob: (b) using a detergent or other agent able to emulsify oils and hold dirt in suspension; and(c) using a concentration as indicated by the chemical manufacturer's use directions included on the product label; (3) The operator shall sanitize each body contact surface of the tanning device, including each seating surface and doorknob:(a) before each use; (b) with a chlorine sanitizer or a quaternary ammonia compound; and(b) using a concentration as indicated by the chemical manufacturer's use directions included on the product label. (4) The operator may use a single product to both clean and sanitize if that product meets the requirements of Subsections (2) and (3) for the cleaning and sanitizing of body contact surfaces of the tanning device. (a) If the operator cleans a body contact surface of a tanning device in a separate process from sanitizing the surface, the operator shall clean the surface before sanitizing it.(5) The operator shall wash and dry towels and other linens between each use.Utah Admin. Code R392-700-9
Adopted by Utah State Bulletin Number 2022-06, effective 3/1/2022