Section R392-304-13 - Underwater Seating and Underwater Shelves(1) The operator shall ensure that each underwater seat or bench located in a DSA complies with Subsection R392-302-11(6).(2) The operator shall ensure that each underwater lounge chair is:(a) specifically designed and constructed for immersion in water;(b) constructed with slip-resistant materials;(c) installed in such a manner that:(i) the chair back is above the designed water level; and(ii) the underwater lounge chair does not constitute a safety hazard for bathers; and(d) visually set apart to be visible to persons on the ground above the lounge chair.(3) The operator shall ensure that each underwater shelf;(a) has a line that marks the extent of the shelf within two inches of its leading edge on both the horizontal and vertical surface, except in the case of a horizontal shelf that terminates with a sloping floor surface, and the line is: (i) two inches in width; and(ii) a contrasting dark color for maximum visual distinction;(b) has a maximum depth of 24 inches; and(c) does not constitute a safety hazard.(4) If the underwater shelf terminates with a sloping floor surface, the operator shall ensure that the floor surface complies with Section R392-304-11.Utah Admin. Code R392-304-13
Adopted by Utah State Bulletin Number 2024-18, effective 9/8/2024