Utah Admin. Code 392-304-10

Current through Bulletin 2024-24, December 15, 2024

Section R392-304-10 - Construction Materials

(1) The operator shall ensure that each DSA of an artificial swimming lagoon and the appurtenances necessary for its proper function and operation are constructed of materials that are:

(a) inert;

(b) non-toxic to humans;

(c) impervious;

(d) durable; and

(e) resistant to the effects of wear and deterioration from chemical, physical, radiological, and mechanical actions, including freezing.

(2) The operator shall ensure that the interior surface of an artificial swimming lagoon is:

(a) able to withstand the stresses associated with normal use and regular maintenance, including complete emptying without shoring or additional support; and

(b) a color that, from the deck or side of the artificial swimming lagoon, a bather is visible at the deepest point and the following items can be identified:

(i) algae growth, debris, or dirt;

(ii) cracks in the surface finish; and

(iii) depth markings.

(3) If a logo or other decorative color is placed on the floor or wall of the DSA of an artificial swimming lagoon, the operator shall ensure that the color or design does not hinder the detection of a bather in distress, algae growth, sediment, or other objects.

(4) The operator shall ensure that each interior surface of a DSA, area of egress, or safety shelf area is:

(a) designed and constructed in a manner that provides a smooth, easily cleanable, non-abrasive, and slip-resistant surface; and

(b) free of cracks or open joints, except for structural expansion joints.

(5) When using an artificial liner for a containment system in an artificial swimming lagoon, the operator shall ensure that the liner meets the NSF/ANSI Standard 61-2016, Drinking Water System Components - Health Effects, as incorporated by reference in this rule, or an equivalent standard.

(6) The operator shall ensure that the design and construction of electrical systems installed in an artificial swimming lagoon meet the requirements of the NFPA 70, National Electrical Code 2017, Article 680, as incorporated by reference in this rule.

Utah Admin. Code R392-304-10

Adopted by Utah State Bulletin Number 2024-18, effective 9/8/2024