Section R313-16-233 - Notification of Intent to Provide Servicing and Services(1) Persons engaged in the business of installing or offering to install radiation machines or engaged in the business of furnishing or offering to furnish radiation machine servicing or services in this State shall notify the Director of the intent to provide these services within 30 days following the effective date of this rule or, thereafter, prior to furnishing or offering to furnish these services.(2) The notification shall specify: (a) that the applicable requirements of these rules have been read and understood;(b) the services which will be provided;(c) the training and experience that qualify for the discharge of the services; and(d) the type of measurement instrument to be used, frequency of calibration, and source of calibration.(3) For the purpose of Section R313-16-233, services may include but shall not be limited to: (a) installation or servicing of radiation machines and associated radiation machine components; and(b) calibration of radiation machines or radiation measurement instruments or devices.(4) Individuals shall not perform the services listed in Subsection R313-16-233(3) unless they are specifically stated for that individual on the notification of intent required in Subsection R313-16-233(1) and the complete information required by Subsection R313-16-233(2) has been received by the Director.Utah Admin. Code R313-16-233