Section R309-305-10 - Certification Suspension and Revocation(1) A certificate may be suspended or revoked for unacceptable or unprofessional conduct, including: (a) acting in disregard for public health or safety;(b) engaging in activities beyond the scope of certification;(c) misinterpreting or falsifying figures or reports concerning backflow prevention assembly or test results;(d) failing to notify proper authorities of a known backflow incident, as required by R309-305-8(4)(a);(e) failing to notify proper authorities of a failed backflow prevention assembly within five days, as required by R309-305-8(4) (b);(f) installing or repairing a backflow prevention assembly that is not certified; or(g) implementing a change in the design, material, or operational characteristics of a certified backflow prevention assembly thereby invalidating the backflow assembly certification.(2) The Commission Secretary shall investigate unprofessional or unacceptable conduct.(3) The Commission shall evaluate the investigation findings and make a recommendation to the Director regarding certification suspension or revocation.(4) The Commission Secretary shall notify a person in writing of the Commission's recommendation if certification is being considered for suspension or revocation.(5) The Director may suspend or revoke a certificate based on the Commission's recommendation.Utah Admin. Code R309-305-10
Adopted by Utah State Bulletin Number 2019-1, effective 1/1/2019