Section R307-841-8 - Renovator Certification and Dust Sampling Technician Certification(1) Renovator certification and dust sampling technician certification. (a) To become a certified renovator or certified dust sampling technician, an individual must successfully complete an initial lead-based paint renovator or dust-sampling technician course accredited by the director under R307-842-1, the EPA under 40 CFR 745.225, or a state or tribal program that has been authorized by EPA pursuant to subpart Q of 40 CFR 745.(b) Individuals who have successfully completed an accredited abatement worker or supervisor course, or individuals who successfully completed a director, EPA, HUD, or EPA/HUD model renovation training course before October 4, 2011, but no later than the training course expiration date found on that training certificate, may take an accredited refresher renovator training course that includes hands-on training in lieu of the initial renovator training course to become a certified renovator.(c) Individuals who have successfully completed an accredited lead-based paint inspector or risk assessor course before October 4, 2011, but no later than the training course expiration date found on that training certificate, may take an accredited refresher dust sampling technician course in lieu of the initial training to become a certified dust sampling technician. Individuals who are currently certified as lead-based paint inspectors or risk assessors may act as certified dust sampling technicians without further training.(d) To maintain renovator certification or dust sampling technician certification, an individual must complete a renovator or dust sampling technician refresher course accredited by the director under R307-842-1, the EPA under 40 CFR 745.225, or by a state or tribal program that is authorized under subpart Q of 40 CFR 745 within 5 years of the date the individual completed the initial course described in paragraph (1)(a) of this section. If the individual does not complete a refresher course within this time, the individual must re-take the initial course to become certified again. Individuals who complete a renovator course accredited by the director under R307-842-1, the EPA or an EPA authorized program on or before March 31, 2010, must complete a renovator refresher course accredited by the director under R307-842-1, the EPA or an EPA authorized program on or before March 31, 2016, to maintain renovator certification. Individuals who completed a renovator course accredited by the director under R307-842-1, the EPA or an EPA authorized program between April 1, 2010 and March 31, 2011, will have one year added to their original 5-year training certificate expiration date. Individuals who take a renovator refresher course that does not include hands-on training will have a training course certificate expiration date 3 years from the date they complete the training. Individuals who take a refresher training course that includes hands-on training will have a training course certificate expiration date 5 years from the date they complete the training. Individuals who take the renovator refresher course without hands-on training must, for their next renovator refresher course, take a course that includes hands-on training.(e) An individual shall be re-certified as a renovator or a dust sampling technician if the individual successfully completes the appropriate lead-based paint accredited refresher training course and submits a valid copy of the appropriate refresher course completion certificate. During the time period when the individual is not certified by the director, that individual cannot perform any regulated work activities that requires individual certification.(2) Renovator responsibilities. Certified renovators are responsible for ensuring compliance with R307-841-5 at all renovations to which they are assigned. A certified renovator: (a) Must perform all of the tasks described in R307-841-5(2) and must either perform or direct workers who perform all of the tasks described in R307-841-5(1);(b) Must provide training to workers on the work practices required by R307-841-5(1) that they will be using in performing their assigned tasks;(c) Must be physically present at the work site when the signs required by R307-841-5(1)(a) are posted, while the work area containment required by R307-841-5(1)(b) is being established, and while the work area cleaning required by R307-841-5(1)(e) is performed;(d) Must regularly direct work being performed by other individuals to ensure that the work practices required by R307-841-5(1) are being followed, including maintaining the integrity of the containment barriers and ensuring that dust or debris does not spread beyond the work area;(e) Must be available, either on-site or by telephone, at all times that renovations are being conducted;(f) When requested by the party contracting for renovation services, must use an acceptable test kit to determine whether components to be affected by the renovation contain lead-based paint;(g) Must have with them at the work site their current Utah Lead-Based Paint Renovator certification card; and(h) Must prepare the records required by R307-841-6(2)(a)(ii), (iii), and (f).(3) Dust sampling technician responsibilities. When performing optional dust clearance sampling under R307-841-5(3), a certified dust sampling technician: (a) Must collect dust samples in accordance with R307-842-3(5)(h), must send the collected samples to a laboratory recognized by EPA under TSCA Section 405(b), and must compare the results to the clearance levels in accordance with R307-842-3(5)(h); and(b) Must have with them at the work site their current Utah Lead-Based Paint Dust Sampling Technician certification card.Utah Admin. Code R307-841-8
Amended by Utah State Bulletin Number 2016-11, effective 5/5/2016Amended by Utah State Bulletin Number 2017-11, effective 5/9/2017Amended by Utah State Bulletin Number 2021-18, effective 9/1/2021