Section R307-410-6 - Stack Heights and Dispersion Techniques(1) The degree of emission limitation required of any source for control of any air pollutant to include determinations made under R307-401, R307-403 and R307-405, must not be affected by so much of any source's stack height that exceeds good engineering practice or by any other dispersion technique except as provided in (2) below. This does not restrict, in any manner, the actual stack height of any source.(2) The provisions in R307-410-6 shall not apply to: (a) stack heights in existence, or dispersion techniques implemented on or before December 31, 1970, except where pollutants are being emitted from such stacks or using such dispersion techniques by sources which were constructed or reconstructed, or for which major modifications were carried out after December 31, 1970; or(b) coal-fired steam electric generating units subject to the provisions of Section 118 of the Clean Air Act, which commenced operation before July 1, 1957, and whose stacks were constructed under a construction contract awarded before February 8, 1974.(3) The director may require the source owner or operator to provide a demonstration that the source stack height meets good engineering practice as required by R307-410-6. The director shall notify the public of the availability of the demonstration as part of the public notice process required by R307-401-7, Pubic Notice.Utah Admin. Code R307-410-6
Amended by Utah State Bulletin Number 2016-1, effective 12/15/2015Amended by Utah State Bulletin Number 2019-24, effective 11/25/2019