Utah Admin. Code 307-343-4

Current through Bulletin 2024-20, October 15, 2024

Section R307-343-4 - VOC Content Limits

(1) No owner or operator shall apply coatings with a VOC content in excess of the amounts specified in Table 1, unless the owner or operator uses an add-on control device as specified in R307-343-6.

Table 1

WOOD MANUFACTURING COATING LIMITS

(values in pounds VOC per gallon of coating, minus water and exempt solvents (compounds not classified as VOC as defined in R307-101-2 ), as applied)

Coating Category	VOC Content Limit (lb/gal)
Topcoat	0.4
Single component, non-catalyzed sealer	0.9
Single component, non-catalyzed topcoat	0.9
Acid -- cured single and 2 component sealer	1.2
Acid -- cured single and 2 component topcoat	1.0
2 component polyurethane topcoat	1.0
2 component polyurethane sealer	1.0
Cobalt peroxide cured polyester sealer/topcoat	1.0
Formaldehyde free acid catalyzed sealer/topcoat	1.0
Strippable spray booth coatings	0.8

(2) The limits in Table 1 do not apply to canned aerosol coating products used exclusively for touch-up or repair.

Utah Admin. Code R307-343-4

Amended by Utah State Bulletin Number 2014-24, effective 12/1/2014

Amended by Utah State Bulletin Number 2018-1, effective 12/6/2017